Specification_SIPLACE_S23HM_eng - 第15页

14 Danger Some local safety requirements dictate that all feeder locations must be equipped with feeders. If the feeder set-up does not fill all feeder locations, guards (dummy feeders) may be used in place of the module…

Description

The SIPLACE Bulk Case feeder

with 2 tracks is used to handle

bulk material. It feeds rectangular

and round passive components.

To refill, the Bulk Cases are ex-

changed, simply and without ma-

chine idle time.

The module essentially consists of

the basic element and the proper

feeder rail and Bulk Case based on

component type and height. The

components are separated and fed

by means of compressed air.

The principle of the stationary

components tables proves its

worth precisely when Bulk Cases

are used. For example, wear which

occurs during vibrations associated

with other placement concepts can

greatly impair the component

quality.

The stationary component table

also brings decisive advantages in

the case of stick magazines: The

general purpose vibratory feeder

can be refilled during placement.

Component Supply:

Bulk Case Feeder, Stick Magazine Feeder

Bulk Case Feeder and Stick Feeders

Bulk Case Feeder

Stick Magazine

Feeder Type III

Technical Data

Bulk Case feeder*

Packaging form Bulk Case

Feed rails for: Chip 0402 component height 0.35 mm

Chip 0402 component height 0.50 mm

Chip 0603 component height 0.45 mm

Chip 0603 component height 0.80 mm

Chip 0805 component height 0.45 mm

Chip 0805 component height 0.60 mm

Chip 0805 component height 0.85 mm

Chip 0805 component height 1.25 mm

Mini-Melf

Feeder location 1 feeder location for 2 different compo-

nent types

Stick magazine feeder Type III with control electronics

Number and width of tracks 3 x 9.5 mm

2 x 15 mm

1 x > 15 mm

1 x 30 mm

Feeder location 1 feeder location

* Reference mark to recognize the position of feeder

Danger

Some local safety requirements

dictate that all feeder locations

must be equipped with feeders.

If the feeder set-up does not fill all

feeder locations, guards (dummy

feeders) may be used in place of

the modules.

Component Supply:

Dummy Feeder

The following dummy feeder variants can be used:

Item no. 00116961-01

Item no. 00116962-01

Item no. 00116963-01

SIPLACE guard for 1 location

SIPLACE guard for 6 - 10 locations

SIPLACE guard for 11 - 20 locations

Various Dummy Feeders

Description

The component bar code scanner

enables a speedy, reliable set-up

and refill check. To this end the bar

codes of the tracks (on the track

scale on the feeder table) and the

components allocated to them (bar

code labels on tapes, Bulk Cases,

etc.) are read in with a hand scan-

ner. An audible and optical signal

acknowledges a successful read-

ing operation. If a label is dam-

aged, the bar code can also be en-

tered at the keyboard.

The allocation of the components

to their respective track is de-

scribed in the set-up data. If the

data received from the bar code

scanner does not correspond with

the set-up data, an error message

is displayed.

If the set-up check is switched on,

it becomes a mandatory step in

the set-up process. If it is switched

off, the set-up check is optional.

Component Supply:

Component Bar Code Scanner for Set-Up and Refill Check

(Option)

Component

Control

Set-Up File

Track Bar Code

Scanner

Technical Data

Connection Station computer

Data entry Bar code scanner or keyboard

Number of characters max. 40

Restrictions Bar codes beginning with number 1 or 2

or with less than 5 characters

Number of bar codes max. 6 per component

Number of filters to blank out

data max. 1 per bar code

Preset types of codes Code 39 (standard or full ASCII),

Code 2 from 5 interleaved and normal,

Code 128, UPC/EAN/JAN codes

(more upon request)

The scanner checks the corresponding track and the components.

Component

Bar Code