00194994_01 - 第11页
SIPLACE Software Guide Version 408.xx 2 Introduction and basic terms Issue 03/06 EN 2.1 Abbreviations 11 2 Introduction and basic terms This chapter descri bes the abbreviations u sed in th is guide, as well as the indic…
1 Preface SIPLACE Software Guide Version 408.xx
1.3 Overview of the issues Issue 03/06 EN
10
SIPLACE Software Guide Version 408.xx 2 Introduction and basic terms
Issue 03/06 EN 2.1 Abbreviations
11
2 Introduction and basic terms
This chapter describes the abbreviations used in this guide, as well as the indicators of a SIPLACE
machine and the system components of a SIPLACE line. 2
2.1 Abbreviations
2
2
Abbreviation Meaning
PA Processing Area
CO Component
PCB Printed Circuit Board
MC Machine Controller
WPC Wafflepack Changer
SC Station Computer
C&P Collect&Place Head
Tab. 2.1 - 1 Abbreviations used in this guide
2 Introduction and basic terms SIPLACE Software Guide Version 408.xx
2.2 Overview Issue 03/06 EN
12
2.2 Overview
2
Fig. 2.2 - 1 Example SIPLACE F5 HM
Key to Fig. 2.2 - 1
(1) Station computer
(2) Monitor
(3) Keyboard
A station may exist as part of a line or may be the only machine in a line. 2
Every station is equipped with a station computer: 2
– which is mounted over the output conveyor on a support (SIPLACE S23 and F5 HM)
– which is located in the machine frame (SIPLACE CS and CF).
A monitor and a keyboard with an integrated trackball and mouse buttons are mounted above the
cover on a pivot arm (see Fig. 2.2 - 1). 2
NOTE
You can operate the station computer software either via the keyboard or via the trackball. 2
1
2
3
1
2
(1)
(2)
(3)