00194994_01 - 第26页

3 Graphical user interface SIPLACE Software Guide Version 408.xx 3.3 User interface - views and menus Issue 03/06 EN 26 3 Fig. 3.3 - 1 SIPLACE Pro Line Control Server Switch to operating system... 3 Y ou use this menu it…

SIPLACE Software Guide Version 408.xx 3 Graphical user interface

Issue 03/06 EN 3.3 User interface - views and menus

3.3 User interface - views and menus

3.3.1 Views

To perform a specific operation via the user interface, you may need to switch this to a different

view. You can do this by clicking the appropriate button on the toolbar (see section 3.2.2) or by

selecting the corresponding menu item from the "View" menu (see section 3.3.2.2). 3

3.3.2 Menus

3.3.2.1 "Mode" menu

The complete set of functions present in the "Mode" menu is only available in the main view.

In the views "Setup", "Errors" and "Feeders" and their sub-views, only the menu items "Stop pro-

cessing PCB" and "Processing PCB" are available. In the other views, the "Mode" menu is not

displayed. 3

NOTE

For a description of the menu items "Stop processing PCB", "Processing PCB" and "Continue pro-

cessing", refer to section 3.2.1. 3

Start OIS 3

This menu function starts the software for the "Operator Information System". The production data

acquisition system can be used to obtain information about the operating behavior of a complete

line or an individual station. 3

Configure SIPLACE Pro connection... 3

In this dialog box, you can specify which computer is permitted to provide the current station com-

puter with data: 3

3 Graphical user interface SIPLACE Software Guide Version 408.xx

3.3 User interface - views and menus Issue 03/06 EN

Fig. 3.3 - 1 SIPLACE Pro Line Control Server

Switch to operating system... 3

You use this menu item to switch to the Windows operating system after entering your password.

From here, you can then subsequently return to the SIPLACE user interface. 3

NOTE

This menu option is not available at the "Operator" access level. 3

Æ Click the Switch to operating system... menu item.

This shows the Windows user interface. The SC software continues to run in the background.

Shut down computer... 3

All applications are closed without any files which may have been processed being saved and the

station computer is shut down. 3

Æ Click the Shut down computer... menu item.

The following dialog box will be opened.

SIPLACE Software Guide Version 408.xx 3 Graphical user interface

Issue 03/06 EN 3.3 User interface - views and menus

Fig. 3.3 - 2 " Shut down computer" dialog box

Æ Click Yes if you want to terminate your work.

The station computer is shut down.

Æ Wait until the computer has shut down completely, and then switch off the station at the main

switch.

3.3.2.2 "View" menu"

The "View" menu contains the options for calling the placement functions, single functions and vi-

sion functions. It is also used to start the SITEST test program. 3

Æ Click the required menu option.

The screen display is switched to the corresponding view. From there you can carry out the

required functions.

NOTE

All the options in this menu can also be started by clicking the corresponding toolbar button (see

section 3.2.2) or by pressing the corresponding function key.

The assignment of the function keys differs from machine to machine and depends on the options

which are installed.

If shortcuts have been defined, these can also be used. 3

The 3 menu options below belong to the group of

placement functions. 3

Set-up F2 3

The setup for a feeder location is displayed in tabular form. It can be called separately for each of

the max. 4 locations. 3