00194994_01 - 第36页

3 Graphical user interface SIPLACE Software Guide Version 408.xx 3.3 User interface - views and menus Issue 03/06 EN 36 Video image > Alt+8 3 In the case of cert ain actions, it may be necessary to display the camer a…

SIPLACE Software Guide Version 408.xx 3 Graphical user interface

Issue 03/06 EN 3.3 User interface - views and menus

Æ Select the required gantry and activate/deactivate the test commands by clicking the corre-

sponding radio buttons.

Æ Click Close to set the software options.

NOTE

When the station is rebooted, the software options are reset to their original settings. 3

Cycle mode... Alt+t 3

This menu item can be used to switch the station to cycle mode (after pressing the stop button).

This function can be used to localize errors. 3

Æ Click the Cycle mode... menu item or press the key combination ALT+t. The "Cycle mode"

settings box is opened.

Æ Click the On radio button to activate cycle mode or the Off radio button to deactivate it.

Æ Click the OK button. Cycle mode is now either activated or deactivated.

NOTE

In cycle mode, you must press the Start button on the machine for every operating step. 3

Load table program 3

This menu item allows you to reload the table program into the memory of the table program

controller. You may need to do this, for example, if a machine error has resulted in the loss of the

table program. 3

NOTE

This function cannot be executed in "Operator" access mode. 3

Æ Click the menu item "Load table program".

The program is loaded. (The loading process can take some time).

3 Graphical user interface SIPLACE Software Guide Version 408.xx

3.3 User interface - views and menus Issue 03/06 EN

Video image > Alt+8 3

In the case of certain actions, it may be necessary to display the camera image of the machine

vision system (vision evaluation unit) on-screen during assembly. 3

Æ Click the Video image > menu item or press the key combination ALT+8. The display area is

switched to the MVS camera image in processing area 1.

Æ Press the ESC key to restore the display area to the normal view.

Cluster for fine calibration... (only for SIPLACE S23 and F5 HM) 3

In "Stand alone" control mode, you can use this menu item to load the data of a selected panel

(placement program) from the station computer’s hard disk. 3

NOTE

A detailed description can be found in the fine calibration manual and in the online Help system.3

Fluxing (only for SIPLACE CF and F5 HM) 3

NOTE

A detailed description can be found in the online Help system. 3

PCB barcode 3

You use this item to display a dialog box with a list of the barcodes most recently read by the PCB

barcode reader. This dialog box also informs you if an error occurred while reading the barcode,

if the file format is incorrect or if no data is available. 3

NOTE

You cannot call the menu item "PCB barcode ..." unless the PCB barcode reader has been in-

stalled in the machine and has been activated in the machine options. 3

Configure traceability... 3

This menu item can be used to specify the settings for the "Traceability" option. The item is only

active if the "Traceability" option has been installed on the SIPLACE machine and is activated in

the "Component verification with barcode" machine options. 3

SIPLACE Software Guide Version 408.xx 3 Graphical user interface

Issue 03/06 EN 3.3 User interface - views and menus

Traceability in PCB production means, among other things, the ability to trace the source of com-

ponents (materials) used in production even after several years. The Traceability function enables

traceability data to be generated during production and makes this data available to the customer

for further processing in the form of a data interface (XML files). 3

NOTE

A detailed description of the "Traceability" option can be found in the Traceability manual and in

the online Help system. 3

3.3.2.4 "Language" menu

It is possible to set the language versions for the user interface integrated into the station com-

puter software via the "Language" menu. The standard installation only contains the languages

German and English. The other languages are optionally installed from the language pack CD-

ROM . 3

NOTE

The languages available for the SIPLACE machines are listed in the software version description

(order number: 00195009-xx). 3

The user interface can be changed to a different language from any view. 3

Æ Click the menu item corresponding to the required language.

The user interface texts are displayed in the selected language.

3.3.2.5 "Help" menu

This menu gives you access to all the functions required to call the help system as well as general

information concerning the station computer or the software. 3

Contents Ctrl+F1 3

This calls the online Help system. 3

Help Alt+F1 3

This calls the Help system and displays information about the current view. 3

Use help 3

Information on how to use the Help system is displayed. 3