00194994_01 - 第42页

3 Graphical user interface SIPLACE Software Guide Version 408.xx 3.3 User interface - views and menus Issue 03/06 EN 42

SIPLACE Software Guide Version 408.xx 3 Graphical user interface

Issue 03/06 EN 3.3 User interface - views and menus

Æ Click the Stop processing PCB function in the Mode menu.

The current placement operation is halted.

Æ Click the Transport position button.

The lift moves to the defined safety/transport position..

Feed tray 3

This allows you to define the level containing the wafflepack tray to be made available for place-

ment. 3

NOTE

The waffle pack changer must not be in the refill position when this function is carried out. 3

Æ Click the Feed tray button.

The following dialog box is displayed.

Æ In the text box, enter the number of the required level and confirm your entry with OK. The waf-

flepack changer moves the wafflepack tray from the selected level to the pick-up position.

NOTE

If a waffle pack tray is already in the pick-up position, it is first moved to its defined level. 3

3 Graphical user interface SIPLACE Software Guide Version 408.xx

3.3 User interface - views and menus Issue 03/06 EN

SIPLACE Software Guide Version 408.xx 4 Switching the SIPLACE line on and off

Issue 03/06 EN 4.1 Switching on the SIPLACE line

4 Switching the SIPLACE line on and

off

This chapter contains information about switching the SIPLACE line on and off. 4

4.1 Switching on the SIPLACE line

4.1.1 Starting the SIPLACE Pro programming system

Æ Start SIPLACE Pro from the Windows NT Start menu:

Start --> Programs --> Siemens SIPLACE

Æ Start SIPLACE Pro by clicking the icon on your desktop.

The system then connects to SIPLACE Pro Server and opens up the SIPLACE Pro user interface.4

4.1.2 What to check before switching on the stations

CAUTION

Carry out the steps described below before switching on the stations. 4

Æ Check to make sure that the stations are connected to both the power supply and to the com-

pressed air supply.

Æ Carry out a visual inspection of the stations. In particular, make sure that there are no obstruc-

tions in the traveling range of the gantries.

Æ Make sure that the z-axes of all heads are in the top end position.

Æ Close the feeder covers and the protective covers.

Æ Make sure that there is no diskette in the disk drive of the station computer.