00194994_01 - 第48页

4 Switching the SIPLACE line on and off SIPLACE Software Guide Version 408.xx 4.2 Switching off the SIPLACE line Issue 03/06 EN 48 Æ Close down the station comput er sof t ware by selecting Mode --> Shut down computer…

SIPLACE Software Guide Version 408.xx 4 Switching the SIPLACE line on and off

Issue 03/06 EN 4.2 Switching off the SIPLACE line

4.2 Switching off the SIPLACE line

CAUTION

Before you switch off the line, ALWAYS make sure that: 4

– All placement operations on the stations have been completed

– The z-axis of all placement heads are in the top end position

– None of the placement heads still contain components

– All gantries have moved into the standby position

– The station computers have been properly shut down.

4.2.1 Switching off SIPLACE Pro (Windows)

Æ Select Item --> Exit from the SIPLACE Pro menu bar.

Æ Close all other programs on the computer.

Æ Select Shutdown from the Windows Start menu.

4.2.2 Switching off the stations

Proceed as follows to switch off the station: 4

Æ Terminate all placement operations.

Æ Check to make sure that the z-axes of all placement heads are in the top end position.

Æ Check to see if there are components in the placement heads and, if necessary, remove.

Æ If necessary, move all gantries to the waiting position with the help of the corresponding gantry

functions (see the user manual for your machine).

NOTE

Gantries are usually moved automatically to the waiting position. 4

4 Switching the SIPLACE line on and off SIPLACE Software Guide Version 408.xx

4.2 Switching off the SIPLACE line Issue 03/06 EN

Æ Close down the station computer software by selecting Mode --> Shut down computer....

Æ Wait until the computer has shut down completely, and then switch off the station at the main

switch.

NOTE

Wait for about 30 seconds before switching on the station again. 4

SIPLACE Software Guide Version 408.xx 5 Error information

Issue 03/06 EN 5.1 General

5 Error information

5.1 General

If errors occur during operations at the placement station, you can call up information about the

possible causes and ways of eliminating the error in question. 5

To do this click the Error information button to start the Help system for the station computer.5

– The information displayed will always be related to the error that is currently displayed on

screen, and from which the Help system was called.

– You can find information about other errors using the help system index. Simply enter the num-

ber of the error you wish to find, and the system will call up the description that belongs to this

error.

5.2 Calling error information

If an error occurs during operation, the appropriate error message is displayed in red in the status

bar of the user interface. The Error information and Clear error buttons are active in the main

view (see Fig. 5.2 - 1). 5

You use the Clear error button to clear an error after the cause of the error has been eliminated.5