00195722-0102_UM_X-Serie_SR605_EN - 第142页

3 Technical data for the machine User Manual SIPLACE X-Series 3.6 Gantry system From software version SR.605.xx 07/2008 EN Edition 142 The Y axis essentially consists of the following main modules: – Y -axis linear motor…

100%1 / 494
User Manual SIPLACE X-Series 3 Technical data for the machine
From software version SR.605.xx 07/2008 EN Edition 3.6 Gantry system
141
3.6.4 Structure of the Y axis
3
Fig. 3.6 - 5 Structure of the Y axis
(1) Y-axis linear motor (primary part)
(2) Permanent magnet (secondary part of the Y-axis linear motor)
(3) Linear distance measuring system
(4) Guide system
(5) Cable and hose carrier
3 Technical data for the machine User Manual SIPLACE X-Series
3.6 Gantry system From software version SR.605.xx 07/2008 EN Edition
142
The Y axis essentially consists of the following main modules:
– Y-axis linear motor (primary part) (1)
– Permanent magnet (secondary part of the Y-axis linear motor) (2)
– Linear distance measuring system (3)
– Guide system (4)
– Cable and hose carrier (5)
The Y axis is driven by a linear motor. The secondary part of the drive is made up of permanent
magnets and is mounted on the machine frame. The primary part is bolted to the gantry.
3.6.5 Technical data for the Y axis
3
Drive Direct, linear motor
Maximum speed 2.5 m/s
Traversing path 1430 mm
Distance measuring system Metal linear scale
Scale length 1850 mm
Resolution 1 μm
User Manual SIPLACE X-Series 3 Technical data for the machine
From software version SR.605.xx 07/2008 EN Edition 3.7 PCB conveyor system
143
3.7 PCB conveyor system
The placement machine is supplied with a single PCB conveyor as standard. The dual PCB con-
veyor is available as an option from the factory (see Section 3.7.6
, page 150). The left or the right
side of the PCB conveyor can be used as the stationary side, as required.
The conveyor belts are driven by DC motors. There is a lifting table for clamping the PCBs in each
processing area. The PCB conveyor width can either be set from the user interface or preset in
the placement program.
3.7.1 Structure
3.7.1.1 Structure of the PCB single conveyor
3
Fig. 3.7 - 1 Structure of the PCB single conveyor
(1) Input conveyor (2) Processing conveyor 1
(3) Intermediate conveyor (4) Processing conveyor 2
(5) Output conveyor (6) Lifting table 1
(7) Lifting table 2 (8) Assembly tray