00195722-0102_UM_X-Serie_SR605_EN - 第216页
3 Technical data for the machine User Manual SIPLACE X-Series 3.11 SIPLACE X-series component trolley From software version SR.605.xx 07/2008 EN Edition 216 There ar e two 5 mm wide gaps (item 4 in Fig. 3.1 1 - 3 , page …
User Manual SIPLACE X-Series 3 Technical data for the machine
From software version SR.605.xx 07/2008 EN Edition 3.11 SIPLACE X-series component trolley
215
3.11.1 Structure
The component trolley essentially consists of the chassis, the component table for holding the
feeder modules, the tape reel container and the waste tape container.
3
Fig. 3.11 - 3 Component trolley, SIPLACE X-series, front and back view
(1) Chassis
(2) Component table
(3) Tape container
(4) Slot for holding set-up lists
(5) Waste tape container
(6) Handle
(7) Hand guard
CAUTION 3
Follow the safety instructions in Section 5.4.2
, page 331, when you pull the waste tape container
out of the component trolley.
3.11.2 Description
In the standard version, the tape reel container (item 3 in Fig. 3.11 - 3) holds tape reels up to 17"
(432 mm).
3 Technical data for the machine User Manual SIPLACE X-Series
3.11 SIPLACE X-series component trolley From software version SR.605.xx 07/2008 EN Edition
216
There are two 5 mm wide gaps (item 4 in Fig. 3.11 - 3, page 215) on the left and right between the
tape container and the component trolley for holding set-up lists.
The pull-out waste tape container (item 5 in Fig. 3.11 - 3
, page 215) can be found beneath the
chassis. The cut waste tape travel down a chute into the waste tape container, which must be
emptied as it fills up.
The handles (item 6 in Fig. 3.11 - 3
, page 215) can be folded up or down.
NOTE 3
All component trolleys, matrix tray changers or waffle-pack changers must be docked on the
machine in order to operate it. Fill any free locations with dummy feeder modules as described in
Section 2.6.5.1, page 85.
3.11.3 Technical data
3
3
Length x width 727 x 592 mm²
752 x 592 mm² with waste container
Height of the component table 819.5 mm for 830 mm PCB conveyor height
889.5 mm for 900 mm PCB conveyor height
919.5 mm for 930 mm PCB conveyor height
939.5 mm for 950 mm PCB conveyor height
PCB conveyor height 830 mm ± 15 mm (standard)
900 mm ± 15 mm (option)
930 mm ± 15 mm (option)
950 mm ± 15 mm (SMEMA option)
Height of the folded up handles 969 mm
Number of locations 40 (8 mm X tape feeder module)
Weight
Without feeder modules
With feeder module at all locations
80.4 kg
139.6 kg
Reel diameter
Standard
Maximum
Up to 432 mm (17")
483 mm (19")
User Manual SIPLACE X-Series 3 Technical data for the machine
From software version SR.605.xx 07/2008 EN Edition 3.11 SIPLACE X-series component trolley
217
3.11.4 Fiducials on the component trolleys from the SIPLACE X-series
3
Fig. 3.11 - 4 Fiducials on the component trolleys from the SIPLACE X-series
(1) Fiducials on the component trolley
Once the SIPLACE X-series component trolley has been docked in, the machine measures the
fiducials on the component trolley.
For components with an edge length of less than 0.5 mm, i.e. 0402 components and smaller, the
position of the component is determined with the tape pocket before the first component is picked
up.