00195722-0102_UM_X-Serie_SR605_EN - 第300页
4 Setting up and commissioning User Manual SIPLACE X-Series 4.3 Setting up the placement machine From software version SR.605.xx 07/2008 EN Edition 300 4.3.15.6 Machine foot clearances for the placemen t machine and WPC …
User Manual SIPLACE X-Series 4 Setting up and commissioning
From software version SR.605.xx 07/2008 EN Edition 4.3 Setting up the placement machine
299
4.3.15.5 Machine foot clearances for the placement machine and MTC
4
4
4
4
Fig. 4.3 - 26 Machine foot clearances for the placement machine and MTC in millimeters
4 Setting up and commissioning User Manual SIPLACE X-Series
4.3 Setting up the placement machine From software version SR.605.xx 07/2008 EN Edition
300
4.3.15.6 Machine foot clearances for the placement machine and WPC
4
4
4
4
Fig. 4.3 - 27 Machine foot clearances for the placement machine and WPC in millimeters
User Manual SIPLACE X-Series 4 Setting up and commissioning
From software version SR.605.xx 07/2008 EN Edition 4.3 Setting up the placement machine
301
4.3.16 Integrating the placement machine into the line
→ Note the warning instructions described in Section 4.3.2, page 255.
→ The tools and equipment are listed in Section 4.3.3
, page 256.
4.3.16.1 Positioning the fork lift
4
Fig. 4.3 - 28 Contact surfaces - Forks across the direction of PCB transport
(1) Contact surfaces for the forks of the fork-lift
→ Position the fork-lift across the direction of PCB transport and open the forks far enough so
that the machine's contact surfaces lies evenly on the forks (see Fig. 4.3 - 28
).