00195722-0102_UM_X-Serie_SR605_EN - 第386页
6 Station extensions User Manual SIPLACE X-Series 6.1 Nozzle changer From software version SR.605.xx 07/2008 EN Edition 386 PLEASE NOTE Make sure that you insert the ma gazine so that the centering pins slide i nto the c…
User Manual SIPLACE X-Series 6 Station extensions
From software version SR.605.xx 07/2008 EN Edition 6.1 Nozzle changer
385
6.1.2.8 Changing the magazine
→ To remove the magazine, push the spring hook (item 1 in Fig. 6.1 - 14) away from the maga-
zine. Lift the magazine out of the carrier.
6
Fig. 6.1 - 14 Changing the magazine
(1) Spring hook
(2) Retaining clamp
(3) Centering hole
(4) Slot
(A) Push the spring hook away from the magazine
6 Station extensions User Manual SIPLACE X-Series
6.1 Nozzle changer From software version SR.605.xx 07/2008 EN Edition
386
PLEASE NOTE
Make sure that you insert the magazine so that the centering pins slide into the centering hole
(item 3 in Fig. 6.1 - 14, page 385) and slot (item 4 in Fig. 6.1 - 14, page 385). 6
→ First place the side of the magazine with the numbered nozzles 1, 2, 3 and 4 on the base. The
retaining clamp (item 2 in Fig. 6.1 - 14
, page 385) must slide into the slot in the magazine.
→ Push the spring hook away from the magazine.
→ Press the magazine so that it lies flat on the base, then release the spring hook. The spring
hook must latch into place.
6.1.2.9 Position detection
Every magazine of the nozzle changer has a positioning fiducial for position detection.
6
Fig. 6.1 - 15 Nozzle changer - Position detection
(1) Positioning fiducial
(2) Position of the nozzles in the magazine with respect to the positioning fiducial
User Manual SIPLACE X-Series 6 Station extensions
From software version SR.605.xx 07/2008 EN Edition 6.1 Nozzle changer
387
6.1.2.10 "Row 2" nozzle changer for the 12-segment Collect&Place head
Item no. 00119663-xx Nozzle changer 2, HF/X/D3, 12-segment Collect&Place head
The "row 2" nozzle changer may be installed at the following locations:
X4 placement machine:Locations 1, 2, 3 and 4 (see Fig. 6.1 - 10
, page 380)
X3 placement machine:Locations 1, 3 and 4 (see Fig. 6.1 - 11
, page 381)
X2 placement machine:Locations 1 and 3 (see Fig. 6.1 - 12
, page 382)
The retrofit package contains an assembly kit and a nozzle take-off device with reject bin, in ad-
dition to the nozzle changer.
6
Fig. 6.1 - 16 Assembly kit for the "row 2" nozzle changer
(1) Assembly kit for the "row 2" nozzle changer
(2) Nozzle take-off device for type 8xx nozzles
(3) Nozzle take-off device for type 9xx nozzles
(4) Nozzle reject bin