CP45松下驱动器部分.pdf - 第15页

9. Motor & Driver Ver. Date CP45 CP45NEO 00 2004/11 O O 9-2 1)Select Icon 'Transmit Paramete[Am plifier => File] 2) Select the destination of parameter 3)General Parameter Setting Fig.9-3-4-1 Transmit Paramet…

9. Motor & Driver

Ver. Date CP45

CP45NEO

00 2004/11 O O

9-2

9-3-3. Changing Setting Value

* Agent or Customer Should not Change Parameter w/o Permission of the

Company and We do not Take Responsibility for any Error of Equipment by

this Change.

But Distributed Part for Service Information can be Changed by Permitted

One.

1) Select 'Transmit Parameter[Amplifier => File]' on Q-SETUP Screen and Download

Parameter File Saved in Driver(=amplifier) (Ref. Fig 9-3-3-1)

2) Click General Parameter Setting to Open Downloaded Amplifier File(*,ap0)

(System Parameter, Motor Parameter are for Expert Use and not Changed)

3) Select Symbol to be Changed and Click 'Edit' to Change (Ref. Fig 9-3-3-2)

9-3-4. Downloading Designated File in Amplifier

* O ur Company Offers Designated Parameter by Each Amplifier

(Drive for Spare Part is Set and Released before Delivery to Agent or Customer)

1) To Download this Parameter to Amplifier, Run Procedure 9-3-1 and 9-3-2 to Read

Parameter of Amplifier First and Save it for Backup

2) Select 'Transmit Parameter[File => Amplifier]' i n Q-SETUP Screen, and Load Parameter

File to Driver (Ref. Fig 9-3-4-1)

At this time, be Sure to Select All 3 Kinds of Parameters(General Parameter, System

Parameter, Motor Parameter) for the Kinds of Parameter to Transmit

9. Motor & Driver

Ver. Date CP45

CP45NEO

00 2004/11 O O

9-2

1)Select Icon

'Transmit Paramete[Am plifier => File]

2) Select the destination of parameter

3)General Parameter Setting

Fig.9-3-4-1

Transmit Parameter[Amplifier => File]

9. Motor & Driver

Ver. Date CP45

CP45NEO

00 2004/11 O O

9-2

Fig.9-3-4-2. General P arameter Setting

1)Select symbol

2)Click Edit

3)Change the value