00193922-03 - 第138页

3 Technical data User manual SIPLACE HF series 3.10 Gantries Software Vers ion SR.50x.xx 01/2006 US Edition 138 3.10 Gantries 3.10.1 Position of the gantries for th e HF placement machine 3 Fig. 3.10 - 1 Position of the …

User manual SIPLACE HF series 3 Technical data

Software Version SR.50x.xx 01/2006 US Edition 3.9 Controls

137

3.9.3.1 Controls on the placement machine's operator panels

The two operator panel have identical control functions. 3

Monitor, keyboard, Start and Stop buttons 3

There is a monitor and a keyboard on both sides of the placement machine. 3

The Start and Stop buttons are located beneath the keyboard. The on-screen dialog will occa-

sionally prompt you to activate certain actions using buttons, and this arrangement will make it

easier for you both to activate and to interactively control these actions. 3

Main power switch 3

The main power switch is part of the power module. It is located on the left-hand operator panel

viewed in the direction of PCB transport. It is located here because it is only needed for servicing

and preventive maintenance work and is therefore not subject to frequent use. 3

3.9.3.2 Controls on the input and output sides of the placement machine

The controls on the input and output sides of the placement machine perform identical functions.3

Emergency stop buttons, Start and Stop buttons 3

There is an emergency stop button and two Start and Stop buttons on both the input and output

sides of the PCB conveyor. This arrangement was adopted for the emergency stop buttons be-

cause it enables them to be reached quickly and easily from any position. 3

In addition, it is important to have an unrestricted view of the placement heads and placement

area during preventive maintenance, servicing and setting up work in order to be able to check

all the operations carried out inside the machine. This particularly important during testing

phases or when starting single functions, for example. 3

3 Technical data User manual SIPLACE HF series

3.10 Gantries Software Version SR.50x.xx 01/2006 US Edition

138

3.10 Gantries

3.10.1 Position of the gantries for the HF placement machine

Fig. 3.10 - 1 Position of the gantries for the HF placement machine

P1 Gantry 1 3

X1 X axis, gantry 1 3

Y1 Y axis, gantry 1 3

P3 Gantry 3 3

X3 X axis, gantry 3 3

Y3 Y axis, gantry 3 3

(T) Direction of PCB transport

The gantry system consists of two functional groups 3

– X axis and

–Y axis

Placement area 2

Placement area 1

User manual SIPLACE HF series 3 Technical data

Software Version SR.50x.xx 01/2006 US Edition 3.10 Gantries

139

3.10.2 Position of the gantries for the HF/3 placement machine

Fig. 3.10 - 2 Position of the gantries for the HF/3 placement machine