00193922-03 - 第241页

User manual SIPLAC E HF series 5 T asks on the m achine Software Vers ion SR.50x.xx 01/2006 US Edition 5.8 Docking the com ponent trolley in or out 241 The safe ty concept for the co mponent tr olley chang e requir es th…

5 Tasks on the machine User manual SIPLACE HF series

5.8 Docking the component trolley in or out Software Version SR.50x.xx 01/2006 US Edition

240

5.8 Docking the component trolley in or out

5.8.1 Safety instructions for docking component trolleys in and out

WARNING

To prevent accidents (risk of crushing), the component trolley may only be docked in or out by

one person.

Fig. 5.8 - 1 Safety instructions for docking the component trolley in or out

(1) Button for docking the component trolley in or out, location 1

(2) Button for docking the component trolley in or out, location 2

(3) Button for docking the component trolley in or out, location 3

(4) Button for docking the component trolley in or out, location 4

(T) Direction of PCB transport

User manual SIPLACE HF series 5 Tasks on the machine

Software Version SR.50x.xx 01/2006 US Edition 5.8 Docking the component trolley in or out

241

The safety concept for the component trolley change requires the operator to press a button (item

1, 2, 3 or 4 in Fig 5.8 - 1

) on the input or output side of the machine in order to dock the component

trolley in or out. This ensures that the operator is always standing to the side of the placement

machine. In addition, the component trolley can only be docked in if the protective covers are

closed.

5.8.2 Docking out the component trolley

Æ Click on the STOP PROCESSING PCB icon in the MAIN VIEW menu.

The PCB in progress will be completed. The icons of the SINGLE FUNCTIONS menu will

then be activated. 5

Æ Click on the desired icon SINGLE FUNCTIONS GANTRY.

Æ Select GANTRY FUNCTIONS.

Æ From this menu, click on the GO TO SET-UP POSITION button.

All the placement heads will move across the PCB conveyor to prevent them being dam-

aged when the component trolley is changed. 5

Æ Press the relevant button on the input or output side of the machine (item 1, 2, 3 or 4 in Fig.

5.8 - 1

) until the trolley is docked out fully.

Æ Swivel the two handles up (item 1 in Fig. 5.8 - 2).

Fig. 5.8 - 2 Component trolley - swivel handles up to push

Æ With both hands on the handles, pull the component trolley out of the placement machine.

5 Tasks on the machine User manual SIPLACE HF series

5.8 Docking the component trolley in or out Software Version SR.50x.xx 01/2006 US Edition

242

5.8.3 Safety instructions for moving the component trolley

WARNING

To prevent accidents, ALWAYS follow the rules listed below when you move the component trol-

ley.

Æ Always hold the handles with both hands when you want to move the component trolley.

Æ Remember that a component trolley with the full complement of feeder modules can tip over

sideways or forward on gradients of 20° or more.

Æ Make sure that the surface on which the trolley is moved has a significantly smaller gradient.

Æ Be careful not to collide with obstacles. The trolley could tip forward if it is traveling fast

enough.

5.8.4 Docking in the component trolley

PLEASE NOTE

Shorten the component tapes on the front end of the S feeder to approximately 3 cm before you

dock in the component trolley.

CAUTION

Check that the placement head is outside the range of the component trolley.

Æ Carefully push the component trolley into machine as far as the stop.

PLEASE NOTE

Close the protective covers since the component trolley can only be docked in if the covers are

closed.

Æ Press the relevant button on the input or output side of the machine (item 1, 2, 3 or 4 in Fig.

5.8 - 1

) until the trolley is docked in fully.