X7056_Operating manual_en.pdf - 第190页
Maintena nce Lubricating the flat panel detector positioni ng unit 190 Inspection system X7056 | Operating manual | Version 3.1 Rev.006| 2016-01-06 | 30.009.1930a Lubricating the flat panel detector positioning unit This…
Maintenance
Lubricating the spindles and travel guides - AXI
189
Inspection system X7056 | Operating manual |
Version 3.1 Rev.006| 2016-01-06 | 30.009.1930a
WARNING
Hazard of injury
Turn off the system and secure it against accidental restart
before starting lubrication.
Perform the following work steps:
1. Check the guides and spindles for dirt and clean these compo-
nents as required.
2. Give the spindle threads and guides a thin coat of grease with
the brush.
3. Open and close the width adjustment, see „Installation“ >
„Adjusting the transport track width“ (Page 86).
4. Open and close the clamping, see „Operation“ > „Releasing the
PCB clamping of the AXI transport track“ (Page 152).
5. Check if there is a visible grease film on the spindles and
guides.
6. Check the function and smoothness of the clamping and width
adjustment.
The spindles and guides are greased.
Maintenance
Lubricating the flat panel detector positioning unit
190
Inspection system X7056 | Operating manual |
Version 3.1 Rev.006| 2016-01-06 | 30.009.1930a
Lubricating the flat panel detector
positioning unit
This section describes how to lubricate the runner blocks and spin-
dles of the flat panel detector positioning unit
The following sections describe how to lubricate the flat panel
detector positioning unit:
Positioning unit flat panel detector
Lubricating the runner blocks and spindles
Positioning unit flat panel detector
The illustrations indicate the position of the runner blocks and
spindles to be lubricated. The lubricating nipples f the runner
blocks and spindle nuts may be mounted on the sides or the front.
X-axis runner block
Legend
No. Name Size Numbe
r
Grease in cm3
1 X-axis runner block 15 2 0.4
1
X
Y
Maintenance
Lubricating the flat panel detector positioning unit
191
Inspection system X7056 | Operating manual |
Version 3.1 Rev.006| 2016-01-06 | 30.009.1930a
Y-axis runner block
Legend
No. Name Size Numbe
r
Grease in cm3
1 Y-axis runner block 15 4 0.4
1
X
Y