X7056_Operating manual_en.pdf - 第206页
Maintena nce Exchanging the AOI transport belts 206 Inspection system X7056 | Operating manual | Version 3.1 Rev.006| 2016-01-06 | 30.009.1930a 4. Span the belt around the outer guide rollers and the tensioning rollers. …
Maintenance
Exchanging the AOI transport belts
205
Inspection system X7056 | Operating manual |
Version 3.1 Rev.006| 2016-01-06 | 30.009.1930a
2. Use the socket wrench (2 mm Allen socket) to unscrew the
tensioning roller.
3. Use the socket wrench (4 mm Allen socket) to install the drive
motor (2 screws).
Maintenance
Exchanging the AOI transport belts
206
Inspection system X7056 | Operating manual |
Version 3.1 Rev.006| 2016-01-06 | 30.009.1930a
4. Span the belt around the outer guide rollers and the tensioning
rollers.
5. Tighten the belt with the belt tensioning roller; use the socket
wrench (2 mm Allen socket) to tighten the screw.
Maintenance
Exchanging the AOI transport belts
207
Inspection system X7056 | Operating manual |
Version 3.1 Rev.006| 2016-01-06 | 30.009.1930a
6. Install the clamping unit evenly, without tilting or bending.
7. Install the end stop guide rail by firmly tightening the 6 screws
with the socket wrench (3 mm Allen socket). Be absolutely
certain that the PCB overlap width value measured during the
disassembly is the same for the assembly.