X7056_Operating manual_en.pdf - 第227页
Maintenanc e Maintaining the XM 3D camera technology 227 Inspection system X7056 | Operating manual | Version 3.1 Rev.006| 2016-01-06 | 30.009.1930a Maintaining the XM 3D camera technology Perform the following work step…
Maintenance
Exchanging filter mat on AXI system computer
226
Inspection system X7056 | Operating manual |
Version 3.1 Rev.006| 2016-01-06 | 30.009.1930a
6. Take out the filter mat and evaluate it:
For minimal contamination, blow out filter mat with
compressed air.
For heavier contamination and yearly, exchange filter mat.
7. Reinstall filter mat.
8. Reinstall system computer and connect cable according to
circuit diagram.
Filter mat on AXI system computer is exchanged.
Maintenance
Maintaining the XM 3D camera technology
227
Inspection system X7056 | Operating manual |
Version 3.1 Rev.006| 2016-01-06 | 30.009.1930a
Maintaining the XM 3D camera technology
Perform the following work steps:
1. Insert a grayscale value plate into the system.
2. Switch on the level 0 illumination and start the image acquisi-
tion on the Zenith label with the orthogonal camera.
If contamination appears in the camera image, move the gray-
scale value plate and check whether the contamination remains
visible at the same position.
? Does the contamination appear at the same position again?
Contact Viscom Service, see „Viscom Support“ (Page 167).
The XM 3-D camera technology has been maintained.
Maintenance
Maintaining the XM 3D camera technology
228
Inspection system X7056 | Operating manual |
Version 3.1 Rev.006| 2016-01-06 | 30.009.1930a