X7056_Operating manual_en.pdf - 第235页
Decommissioning Take the inspection system out of op eration 235 Inspection system X7056 | Operating manual | Version 3.1 Rev.006| 2016-01-06 | 30.009.1930a Attaching the AXI transport locks Precondition: Two transport…
Decommissioning
Take the inspection system out of operation
234
Inspection system X7056 | Operating manual |
Version 3.1 Rev.006| 2016-01-06 | 30.009.1930a
2. Move the image acquisition unit to the front in such a way that
the borings on the axis line up with the borings for the trans-
portation safety device.
3. Screw the Allen screw (M6) completely into the drill hole below
the camera head.
4. Screw the Allen screw (M 8) completely into the drill hole on
the Y-axis.
Completed, continue ...
Attaching the
AOI transport
track transpor-
tation safety
device
Perform the following work steps:
1. Move the AOI transport track completely to the right.
2. Fasten the lower lock with two Allen screws (M6).
Completed, continue ...
The AOI transportation safety devices are attached.
Decommissioning
Take the inspection system out of operation
235
Inspection system X7056 | Operating manual |
Version 3.1 Rev.006| 2016-01-06 | 30.009.1930a
Attaching the AXI transport locks
Precondition: Two transportation safety devices are available.
The inspection system is switched off.
Required: 3 x Allen screws M6
7 x Allen screws M8
Allen (hex) keys (5 and 6 mm)
Perform the following work steps:
1. Open the rear swing doors.
2. Screw the four screws (M8) of the first AXI transportation
safety device into the existing drill holes of the y-axis (6 mm
hex key).
3. Screw the two screws (M8) into the existing drill holes of the x-
axis.
The AXI transportation safety devices are attached.
Decommissioning
Take the inspection system out of operation
236
Inspection system X7056 | Operating manual |
Version 3.1 Rev.006| 2016-01-06 | 30.009.1930a
Removing the front door
Perform the following work steps:
1. Unlock and open the front door.
2. Remove the lower ground/earth cable from the door.
3. Remove the upper ground/earth cable from the door.
4. Unhinge the door.
5. Pack the door in a shipping carton.
The front door is removed.