X7056_Operating manual_en.pdf - 第25页
Product description 25 Inspection system X7056 | Operating manual | Version 3.1 Rev.006| 2016-01-06 | 30.009.1930a Product description This chapter presents the inspec tion system and its main compo- nents. It contains t…
Safety
Remaining Dangers
24
Inspection system X7056 | Operating manual |
Version 3.1 Rev.006| 2016-01-06 | 30.009.1930a
Product description 25
Inspection system X7056 | Operating manual |
Version 3.1 Rev.006| 2016-01-06 | 30.009.1930a
Product description
This chapter presents the inspection system and its main compo-
nents.
It contains the following sections:
The inspection system (Page 26)
Options (Page 27)
Appropriate use (Page 28)
General view (Page 29)
Operation and display elements (Page 34)
System components (Page 37)
Energy supply and interfaces (Page 47)
Safety Features (Page 51)
Product description
The inspection system
26
Inspection system X7056 | Operating manual |
Version 3.1 Rev.006| 2016-01-06 | 30.009.1930a
The inspection system
The inspection system provides a fully automatic and simultaneous
optical (AOI) and X-ray (AXI) inspection of printed circuit boards.
Optical and X-ray inspection take place in two separated sections
within the system.
The inspection system fulfils all requirements for a fully protected
device according to German X-ray regulations from 4 October
2011 and US Standard 21 CFR§ 1020 - 40.
It provides reliable quality control at various production stages of
printed circuit boards. Inspection includes:
Assembly
Solder joints
Concealed defects on BGAs, µBGAs and CSPs
The inspection system is designed to be incorporated into a
production line. Electronics assemblies are conveyed to the inspec--
tion system by suitable conveyors.
Inspection system: integration into a production line
Confirmed defects can be transferred from the inspection system
to the verification station. There, the defects are classified and can
then be transferred to the SPC server for statistical evaluation.
If no verification station is used, the inspection results data can be
transferred directly to the SPC server. The SPC software analyzes
the measurement and results values of the Viscom inspection
systems.
Verification
station
SPC server
Inspection system