X7056_Operating manual_en.pdf - 第56页
Delivery Safety 56 Inspection system X7056 | Operating manual | Version 3.1 Rev.006| 2016-01-06 | 30.009.1930a Safety Follow these safety requirements to prevent damage to the inspec- tion system: Before beginning to t…
Delivery 55
Inspection system X7056 | Operating manual |
Version 3.1 Rev.006| 2016-01-06 | 30.009.1930a
Delivery
This chapter describes how to unpack and set the inspection
system.
It contains the following sections:
Safety (Page 56)
Transport with industrial trucks (Page 57)
Transport indicators (Page 59)
Transportation safety devices (Page 60)
Unpacking the inspection system (Page 61)
Delivery
Safety
56
Inspection system X7056 | Operating manual |
Version 3.1 Rev.006| 2016-01-06 | 30.009.1930a
Safety
Follow these safety requirements to prevent damage to the inspec-
tion system:
Before beginning to transport the system, read and understand
the accompanying transport manual.
Wear safety shoes and protective gloves.
The industrial truck requirements are met, see.„Transport with
industrial trucks“ (Page 57)
Never lift the inspection system from the sides, but only from
the rear side.
To prevent damage to the power supply cables on the front and
back of the inspection system during transport, make sure that
no cables are beneath the inspection system.
Lower the inspection system gently and carefully set it down at
the usage site
For unpacking, use a sufficiently large surface that is protected
from moisture.
Delivery
Transport with industrial trucks
57
Inspection system X7056 | Operating manual |
Version 3.1 Rev.006| 2016-01-06 | 30.009.1930a
Transport with industrial trucks
This chapter lists the requirements for transporting the inspection
system with industrial trucks, with or without transport case. The
following regulations apply for transport with industrial trucks such
as forklift or lift truck.
This chapter contains the following sections:
General specifications (Page 57)
Transport without transport case (Page 58)
Transport with transport case (Page 58)
General specifications
Follow these instructions when transporting the system with or
without transport case:
Always transport from the rear side. see„Transport without
transport case“ (Page 58)
It is essential to observe the following requirements when
selecting an industrial truck: system dimensions, system
weight, center of gravity and tipping angle of the inspection
system, see „Technical specifications“ (Page 251).
Minimum requirements for industrial trucks:
Outer fork distance
Forklift requirements
Minimum fork length in cm 230
Outer fork distance in cm 90 (max. security against tipping) -
max. 91.5
Outer fork
distance