X7056_Operating manual_en.pdf - 第57页
Delivery Transport with in dustrial trucks 57 Inspection system X7056 | Operating manual | Version 3.1 Rev.006| 2016-01-06 | 30.009.1930a Transport with industrial trucks This chapter lists the requi rements for transpor…
Delivery
Safety
56
Inspection system X7056 | Operating manual |
Version 3.1 Rev.006| 2016-01-06 | 30.009.1930a
Safety
Follow these safety requirements to prevent damage to the inspec-
tion system:
Before beginning to transport the system, read and understand
the accompanying transport manual.
Wear safety shoes and protective gloves.
The industrial truck requirements are met, see.„Transport with
industrial trucks“ (Page 57)
Never lift the inspection system from the sides, but only from
the rear side.
To prevent damage to the power supply cables on the front and
back of the inspection system during transport, make sure that
no cables are beneath the inspection system.
Lower the inspection system gently and carefully set it down at
the usage site
For unpacking, use a sufficiently large surface that is protected
from moisture.
Delivery
Transport with industrial trucks
57
Inspection system X7056 | Operating manual |
Version 3.1 Rev.006| 2016-01-06 | 30.009.1930a
Transport with industrial trucks
This chapter lists the requirements for transporting the inspection
system with industrial trucks, with or without transport case. The
following regulations apply for transport with industrial trucks such
as forklift or lift truck.
This chapter contains the following sections:
General specifications (Page 57)
Transport without transport case (Page 58)
Transport with transport case (Page 58)
General specifications
Follow these instructions when transporting the system with or
without transport case:
Always transport from the rear side. see„Transport without
transport case“ (Page 58)
It is essential to observe the following requirements when
selecting an industrial truck: system dimensions, system
weight, center of gravity and tipping angle of the inspection
system, see „Technical specifications“ (Page 251).
Minimum requirements for industrial trucks:
Outer fork distance
Forklift requirements
Minimum fork length in cm 230
Outer fork distance in cm 90 (max. security against tipping) -
max. 91.5
Outer fork
distance
Delivery
Transport with industrial trucks
58
Inspection system X7056 | Operating manual |
Version 3.1 Rev.006| 2016-01-06 | 30.009.1930a
Transport without transport case
Transport from the rear side
Transport with transport case
For overseas transport, the inspection system is packed in a
wooden transport case to protect it from potential transport
damage.
Transport case with indication of center of gravity
Center of Mass