X7056_Operating manual_en.pdf - 第58页
Delivery Transport with indust rial trucks 58 Inspection system X7056 | Operating manual | Version 3.1 Rev.006| 2016-01-06 | 30.009.1930a Transport wi thout transport case T ransport from the rear side Transport with tra…
Delivery
Transport with industrial trucks
57
Inspection system X7056 | Operating manual |
Version 3.1 Rev.006| 2016-01-06 | 30.009.1930a
Transport with industrial trucks
This chapter lists the requirements for transporting the inspection
system with industrial trucks, with or without transport case. The
following regulations apply for transport with industrial trucks such
as forklift or lift truck.
This chapter contains the following sections:
General specifications (Page 57)
Transport without transport case (Page 58)
Transport with transport case (Page 58)
General specifications
Follow these instructions when transporting the system with or
without transport case:
Always transport from the rear side. see„Transport without
transport case“ (Page 58)
It is essential to observe the following requirements when
selecting an industrial truck: system dimensions, system
weight, center of gravity and tipping angle of the inspection
system, see „Technical specifications“ (Page 251).
Minimum requirements for industrial trucks:
Outer fork distance
Forklift requirements
Minimum fork length in cm 230
Outer fork distance in cm 90 (max. security against tipping) -
max. 91.5
Outer fork
distance
Delivery
Transport with industrial trucks
58
Inspection system X7056 | Operating manual |
Version 3.1 Rev.006| 2016-01-06 | 30.009.1930a
Transport without transport case
Transport from the rear side
Transport with transport case
For overseas transport, the inspection system is packed in a
wooden transport case to protect it from potential transport
damage.
Transport case with indication of center of gravity
Center of Mass
Delivery
Transport indicators
59
Inspection system X7056 | Operating manual |
Version 3.1 Rev.006| 2016-01-06 | 30.009.1930a
Transport indicators
The transport indicators monitor the inspection system during
transport.
The transport case and the inspection system are equipped with
the following transport indicators:
Tiltindicator
Impact indicator
Tiltindicator
The tilt indicator changes from white to red if the case is tipped
past a certain angle, which may damage the inspection system.
Tilt indicator: triggered indicator on the right
Impact indicator
The impact indicator changes from white to red when the case
undergoes strong shaking or impact during transport.
Impact indicator: triggered indicator on the right