X7056_Operating manual_en.pdf - 第73页
Installation Mechanical installation 73 Inspection system X7056 | Operating manual | Version 3.1 Rev.006| 2016-01-06 | 30.009.1930a Removing the transport locks from the AX I section The transport locks prevent movement …
Installation
Mechanical installation
72
Inspection system X7056 | Operating manual |
Version 3.1 Rev.006| 2016-01-06 | 30.009.1930a
ATTENTION
Damage to the inspection system
Unsecured transport axes may cause damage during transport.
Only remove the transport locks when the system is at its final
installation site.
Perform the following work steps:
1. Open the front lift door of the inspection system.
Access to the AOI section is open.
2. Remove the left screw of the upper transport lock (5 mm hex
key).
3. Remove the right screw of the upper transport lock (6 mm hex
key).
4. Remove the upper transport lock.
5. Remove the two screws from the lower transport lock (5 mm
hex key).
6. Remove the lower transport lock.
The AOI transport locks are removed.
Installation
Mechanical installation
73
Inspection system X7056 | Operating manual |
Version 3.1 Rev.006| 2016-01-06 | 30.009.1930a
Removing the transport locks from the AXI section
The transport locks prevent movement of the axes during trans-
port. Remove the transport locks before installation.
The following sections describe how to remove the transport
system locks:
Overview
Removing the transport locks
Overview
Transport locks AXI section
Removing the
transport
locks
Required:
Allen (hex) keys (5 and 6 mm)
NOTICE
Store the transport locks for later use.
Legend
No. Name Description
1 Transport lock, AXI section Secures the AXI transport track.
2 Transport lock, AXI section Secures the AXI transport track.
1
2
Installation
Mechanical installation
74
Inspection system X7056 | Operating manual |
Version 3.1 Rev.006| 2016-01-06 | 30.009.1930a
ATTENTION
Damage to the inspection system
Unsecured transport axes may cause damage during transport.
Only remove the transport locks when the system is at its final
installation site.
Perform the following work steps:
1. Open the rear swing doors.
Access to the AXI section is open.
2. Remove the four screws of the first AXI transport lock (6 mm
hex key).
3. Remove the first AXI transport lock.