00196849-02 OG SIPLACE Operation of X and SX-Series without SSC (SW70x)

Titel seit e SIPLACE Operation of X and SX-Series with SSC (SW70x) Operator Guide Edition 03/2011 EN

Titelseite

SIPLACE Operation of X and

SX-Series with SSC (SW70x)

Operator Guide

Edition 03/2011 EN

All names identified by ® are registered trademarks of ASM Assembly Systems GmbH & Co. KG. The remaining trademarks in this publication may be trademarks

whose use by third parties for their own purposes could violate the rights of the owner.

We have reviewed t he contents of this publication to ensure consistency with the hardware and software described. Since variance cannot be precluded entirely, we

cannot guarantee full consistency. However, the information in this publication is reviewed regularly and any necessary connections are included in subsequent

editions.

ASM Assembly Systems GmbH & Co. KG

Rupert-Mayer-Strasse 44

81379 München

Germany

Item no.: 00196849-02

www.siplace.com Printed by ASM Assembly Systems

Operator Guide SIPLACE Operation of X and SX-Series with SSC

Inhaltsverzeichnis

Table of Contents

1 Machine Safety (70x) 15

1.1 Warning Labels - General 15

1.2 Warning Labels - Permanent Magnets 16

1.3 Warning Labels - Tape Cutters 17

1.4 Warning Labels - Lasers 18

1.5 High temperatures related to CP20 head and X feeders. 19

1.6 High temperatures related to Head Control Unit. 20

1.7 Buttons and switches - X-series machines 21

1.8 Safety Covers - X-series machines 22

1.9 Safety Covers – X-series machines 23

1.10 Buttons and switches - SX-series machines 24

1.11 Safety Covers - SX-series machines 25

1.12 Safety Covers – SX-series machines 26

1.13 Further Safety Information 27

2 Machine Overview (70x) 29

2.1 Basic machines in a typical SMT line setup 29

2.2 SIPLACE X-Series machine types 30

2.3 SIPLACE X-Series machine setup 31

2.4 SIPLACE X-Series machine setup 32