00196849-02 OG SIPLACE Operation of X and SX-Series without SSC (SW70x) - 第87页
SW 703 Downloading a Recipe - C hanging the nozzle changer confi gurati on. : 87 Changing t he nozzle change r configuration. (A) Magazine Exchange Pr ocedure. 1. To re move – push t he spr ung lever down to release the …
SW 703 Downloading a Recipe - Changing the nozzle changer setup. :
86
Changing t he nozzle change r setup.
1. The nozzle magazines that need to be changed are
shown in red.
2. The listing shows how the magazine should be
configured.
See the next page for how to change the magazines.
3. Once the change is complete click on ‘Confirm nozzles
in magazine x’.
SW 703 Downloading a Recipe - Changing the nozzle changer configuration. :
87
Changing t he nozzle change r configuration.
(A) Magazine Exchange Procedure.
1. To remove – push the sprung lever down to release
the magazine.
2. Tilt the magazine back and lift up.
3. To replace – slot the back of the magazine against
the rear pins.
4. Push the magazine down until it clicks in place.
(B) Magazine garage numbering.
(C) Magazine numbers – locations 1 & 2.
(D) Magazine numbers – locations 3 & 4.
(T) Transport direction.
SW 703 Downloading a Recipe - Nozzle changer setup is complete. :
88
Nozzle changer setup is complete.
1. Once the changes have been made the icons will no
longer be red and you are ready to start production.