X service技术参数 - 第28页
28 2 x 8 mm S 3 x 8 mm S 3 x 8 mm S 0201 12/16 mm S 24/32 mm S 44 mm S 56 mm S 72 mm S 88 mm S Comp onent Fee ding S Ta pe Feed er Modul es Technical Data a) Fiducial for feed er modu le posi tion re c- ognition; b) for …
27
Component Feeding
Tape Feeder Modules, X-Series
Description
The single-track tape feeder
modules for the X-series pro-
cess paper and blister tapes
from 8 to 88 mm wide.
Component tapes with a per-
manently adhesive cover foil
(PSA foil) can be processed
with the PSA kit option.
The transport increment can
be varied over a wide range.
The foil tear-off force can be
set manually on all the feeder
modules.
The X feeder modules are
characterized by their excel-
lent accuracy of the pick-up
position, online and offline
programmability of the
feeder modules and easy
handling that allows the
feeder modules to be quickly
changed during the place-
ment process.
The multicolor status display
signals the operating status-
es: green for "Standby“, or-
ange for "Warning“ and red
for "Error“. Information ap-
pears on the LCD display for
"orange“ and "red“.
The EDIF unit (energy and
data interface) powers the
feeder module without con-
tact. Communication with
the placement machine also
takes place via this interface.
Technical data
*) In 4 mm increments
Model LxH
[mm²]
Width
[mm]
Loca-
tion
Transpor t
increment
[mm]
Max. tape
height
[mm]
8 mm X 587x200 10.8 1 1/2/4/8 3.5
12 mm X 587x200 22.6 2 4 - 16 *) 6.5
16 mm X 587x200 34.4 3 4 - 20 *) 25
24 mm X 587x200 34.4 3 4 - 32 *) 25
32 mm X 587x200 46.2 4 4 - 40 *) 25
44 mm X 587x200 58.0 5 4 - 52 *) 25
56 mm X 587x200 69.8 6 4 - 64 *) 25
72 mm X 587x200 81.6 7 4 - 80 *) 25
88 mm X 587x200 105.2 9 4 - 96 *) 25
8 mm X
12 mm X
16 mm X 24 mm X 32 mm X
44 mm X 56 mm X 72 mm X 88 mm X
28
2 x 8 mm S
3 x 8 mm S
3 x 8 mm S 0201
12/16 mm S
24/32 mm S
44 mm S
56 mm S
72 mm S
88 mm S
Component Feeding
S Tape Feeder Modules
Technical Data
a) Fiducial for feeder module position rec-
ognition;
b) for 0201 and 0402 only;
c) variable in 4 mm increments;
d) DP = Deep Pocket.
Description
The SIPLACE S feeder mod-
ules process component
tapes from 8 to 88 mm wide.
Reels are kept in the tape
container on the component
changeover table.
Packag-
ing
Model Loca-
tions
Transport
distance
Max.
CO
height
Paper
and blis-
ter tapes
2 x 8 mm S
a)
3 x 8 mm S
3 x 8 mm S
b)
12/16 mm S
1
1
1
1
2/4 mm
2/8 mm
2/4 mm
4/24 mm
c)
2.5 mm
2.5 mm
0.7 mm
14 mm
Blister
tapes
24/32 mm S
24/32 mm S DP
d)
1 x 44 mm S
1 x 44 mm S DP
d)
1 x 56 mm S
1 x 56 mm S DP
d)
1 x 72 mm S
1 x 88 mm S
1.5
1.5
2.0
2.0
2.5
2.5
3
3.5
4/40 mm
c)
4/40 mm
c)
4/52 mm
c)
4/52 mm
c)
4/68 mm
c)
4/68 mm
c)
4/80 mm
c)
4/96 mm
c)
14 mm
25 mm
14 mm
25 mm
14 mm
25 mm
14 mm
14 mm
Tape
reels
178 - 483 mm diameter (7" - 19")
Feeder
module
cycle
S feeder modules up to 20 mm transport distance
< 150 ms
A cutting device automatical-
ly cuts the used tape. SIPLACE
S feeders have short cycle
times and high-precision
pick-up positions. Even multi-
ple products and small batch
sizes are easy to handle since
the feeder modules can be
quickly changed over. Both
the tape cycle increment and
the use of tape materials are
variable. SIPLACE S feeder
modules are suitable for both
paper and plastic tapes. This
represents a significant bene-
fit in terms of both cost and
logistics.
When activated by a signal
from the communication
interface, the feeder modules
automatically control the en-
tire feeder sequence, includ-
ing automatic film tear-off.
S feeder modules with the
additional designation DP
(Deep Pocket) transport com-
ponent tapes up to 25 mm in
height.
29
Component Feeding
Bulk Case and Vibratory Stick Feeder Modules
for the SIPLACE HF CO Changeover Table
Technical data
a) Fiducial for feeder module position recognition
Bulk Case feeder modules
a)
Packaging form Bulk case
Feeder rails Chip 0402, CO height: 0.35 mm
Chip 0402, CO height: 0.50 mm
Chip 0603, CO height: 0.45 mm
Chip 0603, CO height: 0.80 mm
Chip 0805, CO height: 0.45 mm
Chip 0805, CO height: 0.60 mm
Chip 0805, CO height: 0.85 mm
Chip 0805, CO height: 1.25 mm
Micro-Melf: 1.05 ± 0.05 mm
Mini-Melf: 1.4 ± 0.1 mm
Location 1 location for 2 different com-
ponent types
Vibratory stick feeder, type
3
with control circuit
Number of tracks and width 3 x 9.5 mm
2 x 15 mm
1 x > 15 mm
1 x 30 mm
Location 1 location
Description
The SIPLACE bulk case feeder
module processes bulk cases
on two tracks. It feeds rectan-
gular and round, passive
components. The PCB maga-
zines (bulk cases) are simply
replaced for refilling - with-
out stopping the machine.
The module essentially con-
sists of the basic element plus
two feeder rails and PCB mag-
azines to suit the component
type and height. The compo-
nents are separated and fed
along the rails by compressed
air.
The principle of the fixed
component table has proven
its worth, even when bulk
cases are used: the vibrations
that can occur with other
placement machine concepts
can have a highly detrimental
effect on the component
quality due to abrasion, for
example.
Even with stick magazines,
the stationary component
supply has significant advan-
tages: the universal vibratory
stick feeder can be topped up
during placement.
Bulk case feeder modules and
vibratory stick feeders can
only be used on the compo-
nent changeover table for
the SIPLACE HF-series.
S tape feeder modules, bulk
case feeder modules and
vibratory stick feeders cannot
be used together with the
20-segment Collect & Place
head.
Bulk case feeder module
Vibratory -
stick feeder, type 3