X service技术参数 - 第29页
29 Component Feeding Bulk Case and Vibratory Stick Feeder Modules for the SIPLACE HF CO Changeover Table Technical da ta a) Fidu cial for fee der mo dule pos itio n r ecog niti on Bulk Case feeder modules a) Packag ing f…
28
2 x 8 mm S
3 x 8 mm S
3 x 8 mm S 0201
12/16 mm S
24/32 mm S
44 mm S
56 mm S
72 mm S
88 mm S
Component Feeding
S Tape Feeder Modules
Technical Data
a) Fiducial for feeder module position rec-
ognition;
b) for 0201 and 0402 only;
c) variable in 4 mm increments;
d) DP = Deep Pocket.
Description
The SIPLACE S feeder mod-
ules process component
tapes from 8 to 88 mm wide.
Reels are kept in the tape
container on the component
changeover table.
Packag-
ing
Model Loca-
tions
Transport
distance
Max.
CO
height
Paper
and blis-
ter tapes
2 x 8 mm S
a)
3 x 8 mm S
3 x 8 mm S
b)
12/16 mm S
1
1
1
1
2/4 mm
2/8 mm
2/4 mm
4/24 mm
c)
2.5 mm
2.5 mm
0.7 mm
14 mm
Blister
tapes
24/32 mm S
24/32 mm S DP
d)
1 x 44 mm S
1 x 44 mm S DP
d)
1 x 56 mm S
1 x 56 mm S DP
d)
1 x 72 mm S
1 x 88 mm S
1.5
1.5
2.0
2.0
2.5
2.5
3
3.5
4/40 mm
c)
4/40 mm
c)
4/52 mm
c)
4/52 mm
c)
4/68 mm
c)
4/68 mm
c)
4/80 mm
c)
4/96 mm
c)
14 mm
25 mm
14 mm
25 mm
14 mm
25 mm
14 mm
14 mm
Tape
reels
178 - 483 mm diameter (7" - 19")
Feeder
module
cycle
S feeder modules up to 20 mm transport distance
< 150 ms
A cutting device automatical-
ly cuts the used tape. SIPLACE
S feeders have short cycle
times and high-precision
pick-up positions. Even multi-
ple products and small batch
sizes are easy to handle since
the feeder modules can be
quickly changed over. Both
the tape cycle increment and
the use of tape materials are
variable. SIPLACE S feeder
modules are suitable for both
paper and plastic tapes. This
represents a significant bene-
fit in terms of both cost and
logistics.
When activated by a signal
from the communication
interface, the feeder modules
automatically control the en-
tire feeder sequence, includ-
ing automatic film tear-off.
S feeder modules with the
additional designation DP
(Deep Pocket) transport com-
ponent tapes up to 25 mm in
height.
29
Component Feeding
Bulk Case and Vibratory Stick Feeder Modules
for the SIPLACE HF CO Changeover Table
Technical data
a) Fiducial for feeder module position recognition
Bulk Case feeder modules
a)
Packaging form Bulk case
Feeder rails Chip 0402, CO height: 0.35 mm
Chip 0402, CO height: 0.50 mm
Chip 0603, CO height: 0.45 mm
Chip 0603, CO height: 0.80 mm
Chip 0805, CO height: 0.45 mm
Chip 0805, CO height: 0.60 mm
Chip 0805, CO height: 0.85 mm
Chip 0805, CO height: 1.25 mm
Micro-Melf: 1.05 ± 0.05 mm
Mini-Melf: 1.4 ± 0.1 mm
Location 1 location for 2 different com-
ponent types
Vibratory stick feeder, type
3
with control circuit
Number of tracks and width 3 x 9.5 mm
2 x 15 mm
1 x > 15 mm
1 x 30 mm
Location 1 location
Description
The SIPLACE bulk case feeder
module processes bulk cases
on two tracks. It feeds rectan-
gular and round, passive
components. The PCB maga-
zines (bulk cases) are simply
replaced for refilling - with-
out stopping the machine.
The module essentially con-
sists of the basic element plus
two feeder rails and PCB mag-
azines to suit the component
type and height. The compo-
nents are separated and fed
along the rails by compressed
air.
The principle of the fixed
component table has proven
its worth, even when bulk
cases are used: the vibrations
that can occur with other
placement machine concepts
can have a highly detrimental
effect on the component
quality due to abrasion, for
example.
Even with stick magazines,
the stationary component
supply has significant advan-
tages: the universal vibratory
stick feeder can be topped up
during placement.
Bulk case feeder modules and
vibratory stick feeders can
only be used on the compo-
nent changeover table for
the SIPLACE HF-series.
S tape feeder modules, bulk
case feeder modules and
vibratory stick feeders cannot
be used together with the
20-segment Collect & Place
head.
Bulk case feeder module
Vibratory -
stick feeder, type 3
30
Component Feeding
Dummy Feeder Modules
Dummy feeder modules for component changeover tables
from the SIPLACE X-series
The dummy feeder module for the SIPLACE X-series fills one
track on the component changeover table.
Dummy feeder modules for component changeover tables
from the SIPLACE HF-series
The following dummy feeder module variants are available for
component changeover tables from the SIPLACE HF-series:
SIPLACE dummy feeder module for 1 location
SIPLACE dummy feeder module for 6 - 10 locations
SIPLACE dummy feeder module for 11 - 20 locations
Dummy feeder module for one track
Dummy feeder module for 1 location
Dummy feeder module for
6 - 10 locations
Dummy feeder module for
11 - 20 locations
Danger
To ensure that your SIPLACE
placement machine runs
safely, a feeder must be
assigned to every location on
the component changeover
table. If you do not have
enough feeder modules,
then you should use dummy
feeder modules as space
holders.