X service技术参数 - 第44页
44 Technical Data Dimensio ns and Se t-up Conditions * The load per unit area c alculation included an additional workin g space of 0.5 m on each side of the machine, and an add itional transpor t load of 300 kg (machine…
43
Technical Data
Electrical Connection, Interfaces and Com-
pressed Air Connection
Compressed air connectionSMEMA / SIEMENS interface
PC and LAN connection
Power connector
5 x 6 mm² cable with CEKON plug 5 x 32 A (3 x 208 VAC / 3 x 230 VAC)
5 x 4 mm² cable with CEKON plug 5 x 16 A (3 x 380 VAC / 3 x 400 VAC / 3 x 415 VAC)
44
Technical Data
Dimensions and Set-up Conditions
* The load per unit area calculation included an additional working space of 0.5 m on each side of the
machine, and an additional transport load of 300 kg (machine operator, etc).
Further data available on request
Length
with both extension kits
with one extension kit
with no extension kits
2380 mm
2103 mm
1826 mm
Width of the basic machine
X4 with docked CO changeover table (locations 1 + 4)
X4 with docked CO changeover table (locations 2 + 3)
X3 with docked CO changeover table (locations 1 + 4)
X3 with docked CO changeover table (locations 2 + 3)
X2 with docked CO changeover table (locations 1 + 4)
X2 with docked CO changeover table (locations 2 + 3)
incl. monitors
with keyboards
2815 mm
2815 mm
2815 mm
2395 mm
2395 mm
2395 mm
2766 mm
2804 mm
Weight
X4 (machine with component changeover table)
X4 (full configuration with feeder modules)
X3 (machine with component changeover table)
X3 (full configuration with feeder modules)
X2 (machine with component changeover table)
X2 (full configuration with feeder modules)
3880 kg
4255 kg
3790 kg
4171 kg
3705 kg
4086 kg
Footprint
X4, X3 and X2 6.70 m²
Load per unit area
*)
X4
X3
X2
6.30 kN/m²
6.20 kN/m²
6.10 kN/m²
Number of machine feet 6
Height of the machine with warning lamp max. 1863 mm
Machine ground clearance 120 mm (standard height)
240 mm (SMEMA height)
Maximum noise emissions 74 dB (A)
Room temperature between 15 °C and 35 °C
Atmospheric humidity 30 to 75 % (no higher than 45%
on average to prevent any possi-
bility of condensation on the ma-
chine)
45
Technical Data
Dimensions and Set-Up Conditions
Placement System’s Center of Gravity