X service技术参数 - 第49页
49 Option List for the SIPLACE X-Series Available options X4 X3 X2 Notes MTC2 – X X On the X3, in pla cemen t area 2 only Not possible on the X4 The MTC2 cannot be us ed with the 20-n ozzle Collect & Place h ead. Man…
48
Sample Configuration
Services
As a service, SIEMENS L&A
can fully integrate the
SIPLACE X placement
machine into your produc-
tion line. With our extensive
expertise and by using the
right tools and equipment,
we can ensure that the instal-
lation process runs smoothly
and efficiently. However, this
will require you to clarify the
infrastructure aspects in ad-
vance and make any
necessary changes at your
production facility.
Safety instructions
Read the operating instruc-
tions before starting to set up
and commission the place-
ment machine. The applica-
ble accident prevention
regulations concerning the
transportation of heavy
goods must be followed.
PCB transport direction
Nozzle changer C&P20Nozzle changer C&P20
SIPLACE X CO
changeover table
with 40 locations
Nozzle changer C&P20
5-part conveyor belt
with automatic width adjustment
from 50 mm to 508 mm (2“ to 20“)
Nozzle changer C&P20
SIPLACE X CO
changeover table
with 40 locations
49
Option List for the SIPLACE X-Series
Available options X4 X3 X2 Notes
MTC2 – X X On the X3, in placement area 2 only
Not possible on the X4
The MTC2 cannot be used with the 20-nozzle
Collect & Place head.
Manual tray – X X SIPLACE HF component changeover table
SIPLACE X component changeover table X X X
SIPLACE HF component changeover table X X X Not in combination with the C&P20 head
Fixed SIPLACE X component table X X X
Nozzle changer (according to the head) X X X
6-nozzle Collect&Place head X X X
12-nozzle Collect&Place head X X X
TwinHead – X X On the X3, in placement area 2 only
Not possible on the X4
20-nozzle Collect&Place head X X X In the two-gantry area, only in combination with
another 20-nozzle Collect & Place head
Camera type 29 (for C&P12) X X X
Stationary camera, type 25 – X X For the TwinHead only
Coplanarity module – X X For the TwinHead only
Dip module X X X For SIPLACE HF CO changeover tables only
Not for the C&P20 head
Smart Scan X X X
SIPLACE PCB barcode X X X
Further PCB barcode scanners X X X
Single conveyor, fixed side on the right X X X
Single conveyor, fixed side on the left X X X
Dual conveyor, fixed side on the right X X X
Dual conveyor, fixed side on the left X X X
Long board option X X X
PCB alignment, single conveyor X X X
PCB alignment, dual conveyor X X X
Productivity lift X X X Max. PCB width
- Single track 460 mm
- Double track 216 mm
Max. CO height 17 mm on the underfloor section
If the Productivity lift is installed at location 4,
then no MTC2 may be attached to the SIPLACE X2.
Transport height (900, 930, 950) X X X
Vacuum pump X X X Not on the 20-nozzle Collect & Place head
Not on the TwinHead
50