SECS GEM Manual - 第112页

GEM Manual for DEK Printers Equipment Variables Issue 1.6 January 22, 2018 Page 112 of 171 6.3 Status Variables The status variables are defined in the ta ble below: Name SVID Limits Monitor Description Type Value Ra nge…

100%1 / 171
GEM Manual for DEK Printers Equipment Variables
Issue 1.6 January 22, 2018 Page 111 of 171
BoardStopXOffset
86 The current camera board stop X
offset
F8 25-254 mm No
CameraIdlePosition 88 The current selection for the Camera
Idle Position option
U1
0=Home
1=Behind Rail
No
UnloadBoardStart
89 The current selection for the Unload
Board Start option
U1
0=Transport
1=Separation
Yes
MaintenanceMonitoring
95 The current state of the Maintenance
Monitoring option
U1
0=Disabled
1=Enabled
Yes
MachineLocation
96 Free format entry to describe the
location of the machine
A20 Up to 20 characters No
AutoRailWidth
97 The current selection for the
Automatic Rail Width option
U1
0=Disabled
1=Enabled
No
ProductDirectory
98 The path to the local folder where the
product files are stored
A260 Up to 260 characters No
DataFileLocation 99 The path to the local folder where
data and log files are stored
A260 Up to 260 characters No
DownlineBoardStop
101 The current selection of the HTC
Downline Board Stop option
U1
0=Never
1=Always
2=Auto
Yes
FrontRToLSpeed
104 The speed of the front rail belt when
running from right to left
U2 0-32000- 64000 No
FrontLToRSpeed
105 The speed of the front rail belt when
running from left to right
U2 0-32000- 64000 No
RearRToLSpeed
106 The speed of the rear rail belt when
running from right to left
U2 0-32000- 64000 No
RearLToRSpeed 107 The speed of the rear rail belt when
running from left to right
U2 0-32000- 64000 No
AltFrontRToLSpeed
108 The alternate speed of the front rail
belt when running from right to left
U2 0-32000- 64000 No
AltFrontLToRSpeed
109 The alternate speed of the front rail
belt when running from left to right
U2 0-32000- 64000 No
AltRearRToLSpeed
110 The alternate speed of the rear rail
belt when running from left to right
U2 0-32000- 64000 No
AltRearLToRSpeed
111 The alternate speed of the rear rail
belt when running from right to left
U2 0-32000- 64000 No
VacuumPressureRequired 153 The current value of the Vacuum
Pressure (Required) parameter
F8 -100 - -35 - 0 Yes
VacuumValve 154 The current value of the Vacuum
Valve parameter
F8 0 – 100% Yes
GEM Manual for DEK Printers Equipment Variables
Issue 1.6 January 22, 2018 Page 112 of 171
6.3 Status Variables
The status variables are defined in the table below:
Name SVID
Limits
Monitor
Description Type Value Range
GemAlarmsEnabled 1001
No
List of alarms that are enabled. List A list of “n” ALID’s.
GemAlarmsSet 1002
No
List of alarms that are set. List A list of “n” ALID’s.
See chapter 6 for ALID’s.
GemAlarmState 1003
No
State of last alarm transition. U1 0 = OFF
1 = ON
clock 1004
No
Host view of equipment time.
(centisecond precision)
A12/A16
Yymmddhhmmss
Yyyymmddhhmmsscc
GemControlState 1005
No
Current GEM Control State. U1 1 = Equipment Off-Line
2 = Attempt On-Line
3 = Host Off-Line
4 = Local
5 = Remote
process_state 1006
No
Current Equipment Process State. U1 0 = Equipment Ready
1 = Equipment Waiting
2 = Equipment Running
3 = Equipment Setup
4 = Equipment Down
5 = Equipment Recovery
6 = Equipment Maintenance
GemEventsEnabled 1007
No
List of collection events enabled. List A list of “n” CEID’s.
See chapter 7.
humidity 1008 Yes Current humidity in print area. F4 0-100 %
model_number 1009
No
Model number. A6 String
previous_command 1010
No
Last command received from operator
or host.
A See appendix A.
GemPreviousControlState
1011
No
Control state prior to last transition. U1 See GemControlState.
last_process_state 1012
No
Process state before last transition. U1 See process_state.
GemPreviousCeid 1013
No
CEID of last collection event to occur.
U4 See chapter 7.
Reserved 1014
No
software_version 1015
No
Software revision 6 char ASCII. A6 See chapter 4. (SOFTREV)
temperature 1016 Yes Current temperature in the print area. F4 0 -100 (Celsius)
current_time 1017
No
Host view of equipment time.
(1 second precision)
A12/A16
Yymmddhhmmss
Yyyymmddhhmmsscc
system_mode 1018
No
The current machine mode. U1 0 = Step
1 = Auto
2 = Single
3 = No Print
PPExecName 1019
No
Name of cu
rrent process program. A68
batch_count 1020 Yes
Number of Boards printed.
U4 0-99999
Reserved 1021
No
time_last_print 1022
No
Time of the last print. A12/
A16
Yymmddhhmmss/
Yyyymmddhhmmsscc
GEM Manual for DEK Printers Equipment Variables
Issue 1.6 January 22, 2018 Page 113 of 171
spc_data_mode 1023
No
Reporting mode of the SPC. U1 0 = Serial
1 = Disk
2 = Invalid
3 = None
screen_status 1024
No
The position of the screen in the
printer chase.
U1 1 = No screen.
2 = Screen loaded.
3 = Unloaded at front.
4 = Unloaded at rear.
5 = Screen in chase, but not
loaded.
software_version_param 1025
No
The software version to be stored in
the process program file that indicates
the version of software that last
modified the file.
A20 SSS Version MM.mm
SSS = Source machine type.
MM = Major version level.
mm = Minor version level.
SpoolCountActual 1026
No
Used to keep a count of the messages
actually contained in the printer's
spool area. Multi-block inquire/grant
messages are not
spooled and not included in this count.
U4 0 to 2000 (absolute maximum)
SpoolCountTotal 1027
No
Used to keep a count of the total
number of primary messages directed
to the spool, regardless of whether
placed or retained in the
spool. Multi-block inquire/grant
messages are not spooled and not
included in this count.
U4 0 to 0xFFFFFFFF
SpoolFullTime 1028
No
Contains the timestamp from the time
the spool last became full. If the spool
was not filled during the last spooling
period, this will contain a time value
prior to the current SpoolStartTime
.
A12/A16
Yymmddhhmmss
Yyyymmddhhmmsscc
SpoolStartTime 1029
No
Contains the timestamp from the time
spooling last became active.
A12/A16
Yymmddhhmmss
Yyyymmddhhmmsscc
Reserved 1030 -
1049
Not used by the 265.
PPChangeName 1050
No
The name of the last process program
changed (created, modified or deleted)
A68
PPChangeStatus 1051
N
o The change operation last performed U1 1 = Load
2 = Rename
3 = Erase
64 = Created
65 = Renamed
PPError 1052
No
Details of any failed product
validation after up/download
U1 0 = None
PPFormat 1053
No
The format of DEK process programs
U1 Always 1 - Unformatted