SECS GEM Manual - 第114页

GEM Manual for DEK Printers Equipment Variables Issue 1.6 January 22, 2018 Page 114 of 171 6.4 Discrete Data Variables The discrete data variables are defined in the table below : Name DVID Limits Monitor Description Typ…

GEM Manual for DEK Printers Equipment Variables

Issue 1.6 January 22, 2018 Page 113 of 171

spc_data_mode 1023

Reporting mode of the SPC. U1 0 = Serial

1 = Disk

2 = Invalid

3 = None

screen_status 1024

The position of the screen in the

printer chase.

U1 1 = No screen.

2 = Screen loaded.

3 = Unloaded at front.

4 = Unloaded at rear.

5 = Screen in chase, but not

loaded.

software_version_param 1025

The software version to be stored in

the process program file that indicates

the version of software that last

modified the file.

A20 SSS Version MM.mm

SSS = Source machine type.

MM = Major version level.

mm = Minor version level.

SpoolCountActual 1026

Used to keep a count of the messages

actually contained in the printer's

spool area. Multi-block inquire/grant

messages are not

spooled and not included in this count.

U4 0 to 2000 (absolute maximum)

SpoolCountTotal 1027

Used to keep a count of the total

number of primary messages directed

to the spool, regardless of whether

placed or retained in the

spool. Multi-block inquire/grant

messages are not spooled and not

included in this count.

U4 0 to 0xFFFFFFFF

SpoolFullTime 1028

Contains the timestamp from the time

the spool last became full. If the spool

was not filled during the last spooling

period, this will contain a time value

prior to the current SpoolStartTime

A12/A16

Yymmddhhmmss

Yyyymmddhhmmsscc

SpoolStartTime 1029

Contains the timestamp from the time

spooling last became active.

A12/A16

Yymmddhhmmss

Yyyymmddhhmmsscc

Reserved 1030 -

1049

Not used by the 265.

PPChangeName 1050

The name of the last process program

changed (created, modified or deleted)

A68

PPChangeStatus 1051

o The change operation last performed U1 1 = Load

2 = Rename

3 = Erase

64 = Created

65 = Renamed

PPError 1052

Details of any failed product

validation after up/download

U1 0 = None

PPFormat 1053

The format of DEK process programs

U1 Always 1 - Unformatted

GEM Manual for DEK Printers Equipment Variables

Issue 1.6 January 22, 2018 Page 114 of 171

6.4 Discrete Data Variables

The discrete data variables are defined in the table below:

Name DVID

Limits

Monitor

Description Type Value Range

GemAlarmId 2001 No Identity of alarm transition. U4 See chapter 6.

pp_old_file_name 2002 No Name of process program being

changed.

A68 Any characters valid in a

Windows filename.

pp_change_status 2003 No Type of process program change. U1 1 = Load process program

2 = Rename process

program

3 = Erase process program

measured_cycle_time 2004 Yes The duration in seconds of the

most recent machine cycle.

F8 0 = no data

to 3.2 million seconds

throughput_cycle_time 2005 Yes

The average duration in seconds of

the machine cycle time. Averaged

over the last 1 to 50 cycles.

F8 0 = no data

to 3.2 million seconds

Reserved 2006 No

ecid_changed 2007 No VID of changed equipment

constant.

front_print_pressure 2008 Yes Front squeegee pressure of last

cycle.

F8 0-20 Kg

rear_print_pressure 2009 Yes Rear squeegee pressure of last

cycle.

F8 0-20 Kg

print_speed 2010 Yes Speed measured during the last

print stroke.

F8 2-300 mm/s

table_separation_speed 2011 Yes Speed of board and screen

separation measured during last

print cycle.

F8 0.1-20 mm/s

board_stretch_error 2012 Yes Difference between board and

screen fiducials measured after the

print cycle.

5.0 mm

Xerr 2013 Yes X alignment accuracy. F8

0.025 mm

Yerr 2014 Yes Y alignment accuracy. F8

0.025 mm

theta_err 2015 Yes Theta alignment accuracy. F8 arcsec

Squeegee 2016 No Squeegee used to perform the last

print.

U1 0 = No action.

1 = Front squeegee.

2 = Rear squeegee.

current_screen_bar_code

2017 No The barcode of the current screen

as scanned when the screen was

loaded.

The default is “NO CODE”.

A32

Up to a 32 character string.

The actual length is

determined by the barcode.

old_time 2018 No The previous value of the clock

before it was last changed.

A12

A16

Yymmddhhmmss

Yyyymmddhhmmsscc

new_time 2019 No The time that the clock was last

changed.

A12/

A16

Yymmddhhmmss

Yyyymmddhhmmsscc

product_bar_code 2020 No The most recent barcode scanned

by the product barcode reader. The

default is “NO CODE”.

A32

Up to a 32 character string.

The actual length is

determined by the barcode.

board_fiducial_1_score 2021 Yes The acceptance score of board

fiducial 1.

U4 0-1000

board_fiducial_2_score 2022 Yes The acceptance score of board

fiducial 2.

U4 0-1000

GEM Manual for DEK Printers Equipment Variables

Issue 1.6 January 22, 2018 Page 115 of 171

board_fiducial_3_score 2023 Yes The acceptance score of board

fiducial 3.

3 fiducial mode must be selected.

U4 0-1000

screen_fiducial_1_score 2024 Yes The acceptance score of screen

fiducial 1.

U4 0-1000

screen_fiducial_2_score 2025 Yes The acceptance score of screen

fiducial 2.

U4 0-1000

screen_fiducial_3_score 2026 Yes The acceptance score of screen

fiducial 3.

3 fiducial mode must be selected.

U4 0-1000

LimitVariable 2027 No This variable contains the VID for

the variable whose value changed

monitoring zones.

U4 See list of VID’s for limits

monitoring.

EventLimit 2028 No This variable contains the

LIMITID of the limit reached or

crossed by LimitVariable. Since

multiple zone transitions for a

variable may occur simultaneously,

EventLimit has been defined to

allow for a list of LIMITIDs.

List of U1 1-7

TransitionType 2029 No This variable defines the direction

of the zone transition that has

occurred.

1 byte

0 = Transition from lower

zone to upper zone.

1 = Transition from upper

zone to lower zone.

RemoteBarCode 2030 No Product bar code string provided

by the serial bar code reader.

The default is “NO CODE”.

A32

Up to a 32 character string.

The actual length is

determined by the barcode.

ProflowPastePressure 2031 Yes Actual Paste Pressure used by the

Proflow paste mechanism.

F8 0-20 Kg

Reserved 2032 No Not used by the 265.

Traceability Data 2033 No List of traceability data for the last

processed product.

Variable See <Traceability Data>

Failed verification item 2034 No List of the items that last failed

verification

Variable See <Failed Verification

Items>

Reserved 2083 -

2085

No Not Used

front_print_speed 2086 Yes Speed measured during the last

front print stroke.

F8 2-300 mm/s

rear_print_speed 2087 Yes Speed measured during the last

rear print stroke.

F8 2-300 mm/s

Modified Parameters 2088 No This variable contains the

parameter ID, name, old value and

new value for the parameters

whose value changed at

instrument.

Modified

Parameter

List

See <Modified Parameter

List>

PrintDeposits 2090 No This variable contains the number

of print deposits during a print

cycle.

U1 1-10

PrintSpeedDeposit1 to

PrintSpeedDeposit10

2091 to

2100

No These variables contain the print

stroke speeds for their

corresponding print deposit during

a print cycle.

F8 2-300 mm/s