SECS GEM Manual - 第116页

GEM Manual for DEK Printers Equipment Variables Issue 1.6 January 22, 2018 Page 116 of 171 CleanRate1 2151 No This variable co ntains the 1st rate at which a clean ta kes place during a print cycle. U4 0-200 CleanRate2 2…

100%1 / 171
GEM Manual for DEK Printers Equipment Variables
Issue 1.6 January 22, 2018 Page 115 of 171
board_fiducial_3_score 2023 Yes The acceptance score of board
fiducial 3.
3 fiducial mode must be selected.
U4 0-1000
screen_fiducial_1_score 2024 Yes The acceptance score of screen
fiducial 1.
U4 0-1000
screen_fiducial_2_score 2025 Yes The acceptance score of screen
fiducial 2.
U4 0-1000
screen_fiducial_3_score 2026 Yes The acceptance score of screen
fiducial 3.
3 fiducial mode must be selected.
U4 0-1000
LimitVariable 2027 No This variable contains the VID for
the variable whose value changed
monitoring zones.
U4 See list of VID’s for limits
monitoring.
EventLimit 2028 No This variable contains the
LIMITID of the limit reached or
crossed by LimitVariable. Since
multiple zone transitions for a
variable may occur simultaneously,
EventLimit has been defined to
allow for a list of LIMITIDs.
List of U1 1-7
TransitionType 2029 No This variable defines the direction
of the zone transition that has
occurred.
B
1 byte
0 = Transition from lower
zone to upper zone.
1 = Transition from upper
zone to lower zone.
RemoteBarCode 2030 No Product bar code string provided
by the serial bar code reader.
The default is “NO CODE”.
A32
Up to a 32 character string.
The actual length is
determined by the barcode.
ProflowPastePressure 2031 Yes Actual Paste Pressure used by the
Proflow paste mechanism.
F8 0-20 Kg
Reserved 2032 No Not used by the 265.
Traceability Data 2033 No List of traceability data for the last
processed product.
Variable See <Traceability Data>
Failed verification item 2034 No List of the items that last failed
verification
Variable See <Failed Verification
Items>
Reserved 2083 -
2085
No Not Used
front_print_speed 2086 Yes Speed measured during the last
front print stroke.
F8 2-300 mm/s
rear_print_speed 2087 Yes Speed measured during the last
rear print stroke.
F8 2-300 mm/s
Modified Parameters 2088 No This variable contains the
parameter ID, name, old value and
new value for the parameters
whose value changed at
instrument.
Modified
Parameter
List
See <Modified Parameter
List>
PrintDeposits 2090 No This variable contains the number
of print deposits during a print
cycle.
U1 1-10
PrintSpeedDeposit1 to
PrintSpeedDeposit10
2091 to
2100
No These variables contain the print
stroke speeds for their
corresponding print deposit during
a print cycle.
F8 2-300 mm/s
GEM Manual for DEK Printers Equipment Variables
Issue 1.6 January 22, 2018 Page 116 of 171
CleanRate1 2151 No This variable contains the 1st rate
at which a clean takes place during
a print cycle.
U4 0-200
CleanRate2 2152 No This variable contains the 2nd rate
at which a clean takes place during
a print cycle.
U4 0-200
LastCleanType 2153 No This variable contains the last
clean type that took place.
A32 Up to a 32 character string
representing the clean type.
Cyclone Duo Clean Rate
1
2154 No This variable contains the 1st rate
at which a clean takes place during
a print cycle with a Cyclone Duo
cleaner
U4 0-200
Cyclone Duo Clean Rate
2
2155 No This variable contains the 2nd rate
at which a clean takes place during
a print cycle with a Cyclone Duo
cleaner.
U4 0-200
GEM Manual for DEK Printers Equipment Variables
Issue 1.6 January 22, 2018 Page 117 of 171
6.4.1 Limit List
The Limit Set Values are held in a list that is structured as follows:
<Limit List>:
Structure: L, m ; m = Number of Limit sets
; with SPC output enabled.
1. L, 28 ; First Limit Set
1. Limit Blockage Ave ;Type F4
2. Limit Blockage Max ;Type F4
3. Limit blockage Max Site ID ;Type A20
4. Limit Blockage Min ;Type F4
5. Limit blockage Max Site ID ;Type A20
6. Limit Paste Ave ;Type F4
7. Limit Paste Max ;Type F4
8. Limit paste Max Site ID ;Type A20
9. Limit Paste Min ;Type F4
10. Limit paste Min Site ID ;Type A20
11. Limit Volume Ave ;Type F4
12. Limit Volume Max ;Type F4
13. Limit volume Max Site ID ;Type A20
14. Limit Volume Min ;Type F4
15. Limit volume Min Site ID ;Type A20
16. Limit Print X Ave ;Type F8
17. Limit Print X Max ;Type F8
18. Limit print X Max Site ID ;Type A20
19. Limit Print X Min ;Type F8
20. Limit print X Min Site ID ;Type A20
21. Limit Print Y Ave ;Type F8
22. Limit Print Y Max ;Type F8
23. Limit print Y Max Site ID ;Type A20
24. Limit Print Y Min ;Type F8
25. Limit print Y Min Site ID ;Type A20
26. Limit Smear ;Type F8
27. Limit Bridging ;Type F8
28. Limit ID ;Type A20
.
. ; all elements of the list are identically
m. ; structured