SECS GEM Manual - 第146页
GEM Manual for DEK Printers Event M essages Issue 1.6 January 22, 2018 Page 146 of 171 8.9 Equipment Specific Information Events EVENT - CEID DESCRIPTION 10002 System power on. 31251 Line power on . 31255 Printer rea dy.…
GEM Manual for DEK Printers Event Messages
Issue 1.6 January 22, 2018 Page 145 of 171
40050 Board fiducial 3 not found.
40051 Screen fiducial 1 not found.
40052 Screen fiducial 2 not found.
40053 Screen fiducial 3 not found.
40054 Select mark not found.
40056 Bad tooling vacuum.
40146 Cleaner detached from camera.
40147 Recovered cleaner detached from camera.
40148 Method of post print analysis is not enabled.
40149 Producing without post print analysis.
40150 Ball escape detected.
40152 Verification item failed (see DVID 2034).
40157 Product ID verification failed.
40300 Advanced Adjust Entered.
40320 Cleaner Vacuum Sense Error.
GEM Manual for DEK Printers Event Messages
Issue 1.6 January 22, 2018 Page 146 of 171
8.9 Equipment Specific Information Events
EVENT - CEID
DESCRIPTION
10002 System power on.
31251 Line power on.
31255 Printer ready.
31256 Head raised.
31257 Head closed.
31260 Cycle aborted.
31261 Cycle completed.
31262 Cleaning screen.
31263 Parameter adjusted. (See Appendix A)
31264 Setup started.
31272 Setup ended.
31273 Start print cycle.
31275 End print cycle.
31277 Board printed.
31278 Operator log on.
31279 Operator log off.
31280 Clear batch count.
31281 Start maintenance.
31282 End maintenance.
31283 Pressure recalibrated.
31284 Offset recalibrated.
31285 X,Y scale recalibrated.
31286 Theta recalibrated.
31287 Configuration change.
31288 Start diagnostics.
31289 End diagnostics.
31290 Flood height reset.
31291 Camera reference reset.
31292 Thickness recalibrated.
31293 Vision height reset.
31294 Print height reset.
31296 Software updated.
31297 New event log.
31298 Front reference position reset.
31299 Front reference height reset.
31300 Rear reference height reset.
31301 No cleaner paper.
31302 No cleaner solvent.
GEM Manual for DEK Printers Event Messages
Issue 1.6 January 22, 2018 Page 147 of 171
31316 Inspection cycle complete.
31317 Clock change request.
31318 Clock changed.
31345 Configuration Parameter modified (with change details – see section 9.15)
31347 Adjust Parameter modified (with change details – see section 9.15)
31457 Remote barcode received.
31547 Start product changeover.
31548 End product changeover.
31549 Transfer bad board.
40004 Evaluation dongle detected.
40005 Valid dongle detected.
40007 Dongle changed.
40008 Front print speed.
40009 Rear print speed.
40020 Maintenance monitoring initialised.
40021 Monthly service due.
40022 Six monthly service due.
40023 Yearly service due.
40029 Paste roll height monitoring abandoned.
40030 Insufficient paste roll height.
40031 Insufficient print medium dispensed.
40042 Vortex cassette expired.
40055 ProFlow cassette low.
40057 Fast print speed selected.
40058 Normal print speed selected.
40060 Board unstarved.
40061 Board unblocked.
40062 Board starved.
40063 Board blocked.
40064 Clean started.
40065 Clean complete.
40066 2D Inspection started.
40067 2D Inspection complete.
40068 Paste dispense started.
40069 Paste dispense complete.
40070 Paper level low.
40072 Pneumatic power restored.
40073 Event log nearly full.
40074 Deposit verification error.
40075 Deposit verification error stop.
40076 Deposit verification error continue.
40077 Deposit verification error warning.