SECS GEM Manual - 第147页

GEM Manual for DEK Printers Event M essages Issue 1.6 January 22, 2018 Page 147 of 171 31316 Inspection cyc le complete. 31317 Clock change reque st. 31318 Clock changed. 31345 Configuration Paramete r modified (with cha…

100%1 / 171
GEM Manual for DEK Printers Event Messages
Issue 1.6 January 22, 2018 Page 146 of 171
8.9 Equipment Specific Information Events
EVENT - CEID
DESCRIPTION
10002 System power on.
31251 Line power on.
31255 Printer ready.
31256 Head raised.
31257 Head closed.
31260 Cycle aborted.
31261 Cycle completed.
31262 Cleaning screen.
31263 Parameter adjusted. (See Appendix A)
31264 Setup started.
31272 Setup ended.
31273 Start print cycle.
31275 End print cycle.
31277 Board printed.
31278 Operator log on.
31279 Operator log off.
31280 Clear batch count.
31281 Start maintenance.
31282 End maintenance.
31283 Pressure recalibrated.
31284 Offset recalibrated.
31285 X,Y scale recalibrated.
31286 Theta recalibrated.
31287 Configuration change.
31288 Start diagnostics.
31289 End diagnostics.
31290 Flood height reset.
31291 Camera reference reset.
31292 Thickness recalibrated.
31293 Vision height reset.
31294 Print height reset.
31296 Software updated.
31297 New event log.
31298 Front reference position reset.
31299 Front reference height reset.
31300 Rear reference height reset.
31301 No cleaner paper.
31302 No cleaner solvent.
GEM Manual for DEK Printers Event Messages
Issue 1.6 January 22, 2018 Page 147 of 171
31316 Inspection cycle complete.
31317 Clock change request.
31318 Clock changed.
31345 Configuration Parameter modified (with change details – see section 9.15)
31347 Adjust Parameter modified (with change details – see section 9.15)
31457 Remote barcode received.
31547 Start product changeover.
31548 End product changeover.
31549 Transfer bad board.
40004 Evaluation dongle detected.
40005 Valid dongle detected.
40007 Dongle changed.
40008 Front print speed.
40009 Rear print speed.
40020 Maintenance monitoring initialised.
40021 Monthly service due.
40022 Six monthly service due.
40023 Yearly service due.
40029 Paste roll height monitoring abandoned.
40030 Insufficient paste roll height.
40031 Insufficient print medium dispensed.
40042 Vortex cassette expired.
40055 ProFlow cassette low.
40057 Fast print speed selected.
40058 Normal print speed selected.
40060 Board unstarved.
40061 Board unblocked.
40062 Board starved.
40063 Board blocked.
40064 Clean started.
40065 Clean complete.
40066 2D Inspection started.
40067 2D Inspection complete.
40068 Paste dispense started.
40069 Paste dispense complete.
40070 Paper level low.
40072 Pneumatic power restored.
40073 Event log nearly full.
40074 Deposit verification error.
40075 Deposit verification error stop.
40076 Deposit verification error continue.
40077 Deposit verification error warning.
GEM Manual for DEK Printers Event Messages
Issue 1.6 January 22, 2018 Page 148 of 171
40078 Password attempt succeeded.
40079 Password attempt failed.
40126 Fiducial setup entered.
40127 Fiducial setup ended.
40128 Diagnostics ended.
40129 Adjust entered.
40130 Adjust ended.
40131 Adjust while running entered.
40132 Adjust while running ended.
40151 Verification succeeded (see DVID 2034).
40153 Verification value reset (see DVID 2034).
40154 Verification value restored (see DVID 2034).
40155 Batch/lot ID changed.
40156 Product ID verification succeeded.
40158 Auto paste dispense cancelled.
40160 Proflow hardware detected.
40161 Proflow raised.
40162 Proflow lowered.
40163 Proflow primed.
40164 Proflow kneaded.
40165 Proflow paste cartridge low.
40166 Proflow paste cartridge set to empty.
40167 Proflow paste cartridge set to full.
40168 Proflow paste cartridge changed.
40169 Proflow paste conditioning started.
40170 Proflow paste conditioning stopped.
40171 Proflow paste conditioning finished.
40172 Proflow paste recharging started.
40173 Proflow paste recharging stopped.
40174 Proflow paste recharging finished.
40177 Traceability Data Available.
40179 Deceleration offset window changed.
40180 Proflow grid stall detected.
40181 Proflow board count recharge due.
40182 Proflow paste head low.
40183 Proflow paste head ok.
40184 Proflow paste recharging failed.
40185 Proflow carriage home offset changed.
40186 Product defined tooling confirmation.
40191 Fiducial Alignment Started.
40192 Fiducial Alignment Complete.
40194 Machine prime paste dispense started.