SECS GEM Manual - 第148页

GEM Manual for DEK Printers Event M essages Issue 1.6 January 22, 2018 Page 148 of 171 40078 Password attempt succeeded. 40079 Password attempt failed. 40126 Fiducial setup e ntered. 40127 Fiducial setup e nded. 40128 Di…

100%1 / 171
GEM Manual for DEK Printers Event Messages
Issue 1.6 January 22, 2018 Page 147 of 171
31316 Inspection cycle complete.
31317 Clock change request.
31318 Clock changed.
31345 Configuration Parameter modified (with change details – see section 9.15)
31347 Adjust Parameter modified (with change details – see section 9.15)
31457 Remote barcode received.
31547 Start product changeover.
31548 End product changeover.
31549 Transfer bad board.
40004 Evaluation dongle detected.
40005 Valid dongle detected.
40007 Dongle changed.
40008 Front print speed.
40009 Rear print speed.
40020 Maintenance monitoring initialised.
40021 Monthly service due.
40022 Six monthly service due.
40023 Yearly service due.
40029 Paste roll height monitoring abandoned.
40030 Insufficient paste roll height.
40031 Insufficient print medium dispensed.
40042 Vortex cassette expired.
40055 ProFlow cassette low.
40057 Fast print speed selected.
40058 Normal print speed selected.
40060 Board unstarved.
40061 Board unblocked.
40062 Board starved.
40063 Board blocked.
40064 Clean started.
40065 Clean complete.
40066 2D Inspection started.
40067 2D Inspection complete.
40068 Paste dispense started.
40069 Paste dispense complete.
40070 Paper level low.
40072 Pneumatic power restored.
40073 Event log nearly full.
40074 Deposit verification error.
40075 Deposit verification error stop.
40076 Deposit verification error continue.
40077 Deposit verification error warning.
GEM Manual for DEK Printers Event Messages
Issue 1.6 January 22, 2018 Page 148 of 171
40078 Password attempt succeeded.
40079 Password attempt failed.
40126 Fiducial setup entered.
40127 Fiducial setup ended.
40128 Diagnostics ended.
40129 Adjust entered.
40130 Adjust ended.
40131 Adjust while running entered.
40132 Adjust while running ended.
40151 Verification succeeded (see DVID 2034).
40153 Verification value reset (see DVID 2034).
40154 Verification value restored (see DVID 2034).
40155 Batch/lot ID changed.
40156 Product ID verification succeeded.
40158 Auto paste dispense cancelled.
40160 Proflow hardware detected.
40161 Proflow raised.
40162 Proflow lowered.
40163 Proflow primed.
40164 Proflow kneaded.
40165 Proflow paste cartridge low.
40166 Proflow paste cartridge set to empty.
40167 Proflow paste cartridge set to full.
40168 Proflow paste cartridge changed.
40169 Proflow paste conditioning started.
40170 Proflow paste conditioning stopped.
40171 Proflow paste conditioning finished.
40172 Proflow paste recharging started.
40173 Proflow paste recharging stopped.
40174 Proflow paste recharging finished.
40177 Traceability Data Available.
40179 Deceleration offset window changed.
40180 Proflow grid stall detected.
40181 Proflow board count recharge due.
40182 Proflow paste head low.
40183 Proflow paste head ok.
40184 Proflow paste recharging failed.
40185 Proflow carriage home offset changed.
40186 Product defined tooling confirmation.
40191 Fiducial Alignment Started.
40192 Fiducial Alignment Complete.
40194 Machine prime paste dispense started.
GEM Manual for DEK Printers Event Messages
Issue 1.6 January 22, 2018 Page 149 of 171
40195 Machine prime paste dispense cancelled.
40196 Machine prime paste dispense finished.
40350 Print cycle paused.
40351 Print cycle resumed.
40352 Ball escape removed.
40353 Proflow cassette low cleared.
40354 SPC limit error cleared.
40355 Machine paste knead started.
40356 Machine paste knead finished.
40357 Tooling setup started.
40358 Tooling setup finished.
40359 Stencil alignment started.
40360 Stencil alignment finished.
40361 Print pre checks complete.
40362 Deposit verification passed.
40363 Deposit verification started.
40364 Paste cartridge empty deferred.
40369 Stinger purge.
40370 Stinger auto z calibration.
40371 Stinger replenishment.
40372 Stinger replenishment deferred.
40374 Fiducial Alignment SW Fallback.
40387 Vacuum tooling off.
40388 Vacuum tooling on.
40397 Double alignment performed.
40422 Windows 7 operating system error.
40423 XP operating system.
40434 Paste dispense completed.
40435 Stinger dispense started.
40436 Stinger dispense completed.
40454 Camera not clear of table.
40455 Reset pressure correction offset.