SECS GEM Manual - 第150页

GEM Manual for DEK Printers Event M essages Issue 1.6 January 22, 2018 Page 150 of 171 8.10 Specific Material Movement Events EVENT - CEID DESCRIPTION 31258 Paste dispensing. 31259 Paste cartr idge empty. 31268 Screen un…

100%1 / 171
GEM Manual for DEK Printers Event Messages
Issue 1.6 January 22, 2018 Page 149 of 171
40195 Machine prime paste dispense cancelled.
40196 Machine prime paste dispense finished.
40350 Print cycle paused.
40351 Print cycle resumed.
40352 Ball escape removed.
40353 Proflow cassette low cleared.
40354 SPC limit error cleared.
40355 Machine paste knead started.
40356 Machine paste knead finished.
40357 Tooling setup started.
40358 Tooling setup finished.
40359 Stencil alignment started.
40360 Stencil alignment finished.
40361 Print pre checks complete.
40362 Deposit verification passed.
40363 Deposit verification started.
40364 Paste cartridge empty deferred.
40369 Stinger purge.
40370 Stinger auto z calibration.
40371 Stinger replenishment.
40372 Stinger replenishment deferred.
40374 Fiducial Alignment SW Fallback.
40387 Vacuum tooling off.
40388 Vacuum tooling on.
40397 Double alignment performed.
40422 Windows 7 operating system error.
40423 XP operating system.
40434 Paste dispense completed.
40435 Stinger dispense started.
40436 Stinger dispense completed.
40454 Camera not clear of table.
40455 Reset pressure correction offset.
GEM Manual for DEK Printers Event Messages
Issue 1.6 January 22, 2018 Page 150 of 171
8.10 Specific Material Movement Events
EVENT - CEID
DESCRIPTION
31258 Paste dispensing.
31259 Paste cartridge empty.
31268 Screen unloaded.
31269 Screen loaded.
31270 Tool change started.
31271 Tool change completed.
31274 Board received.
31276 Printed board ready.
31319 Board delivered / removed.
40024 Vortex cassette replaced.
40071 Paper roll replaced.
8.11 Host Specific Information Events
EVENT - CEID
DESCRIPTION
31400 Process program directory request.
31401 Process program request.
31402 Erase process program request.
31403 Rename process program request.
31404 Load process program request.
31405 Download process program request.
31406 Upload process program request.
31407 Download configuration request.
31408 Upload configuration request.
31409 Upload management data request.
31410 Clear management batch data request.
31411 Clear management session data request.
31412 Upload event log.
31413 Clear event log request.
31414 Comms - Start request.
31415 Comms - Stop request.
31416 Update mode request.
31417 Communication error.
31418 Parameter information uploaded.
31419 Parameter information downloaded.
31420 Upload parameter.
31421 Comms - Status request.
GEM Manual for DEK Printers Event Messages
Issue 1.6 January 22, 2018 Page 151 of 171
31422 Comms - Rebuild process program list.
31423 Paste dispense rate adjusted.
31424 Print speed adjusted.
31425 Front squeegee pressure adjusted.
31426 Rear squeegee pressure adjusted.
31427 Print gap adjusted.
31428 Separation speed adjusted.
31429 Cleaning rate adjusted.
31430 X forward offset adjusted.
31431 Y forward offset adjusted.
31432 Theta forward offset adjusted.
31433 X reverse offset adjusted.
31434 Y reverse offset adjusted.
31435 Theta reverse offset adjusted.
31436 Paste dispensed after host command.
31437 Screen cleaned after host command.
31438 Comms enabled.
31439 Comms disabled.
31442 Paste kneaded after host command.
31443 Paste conditioned after host command.
31458 Proflow pressure adjusted.
40010 Comms - Adjust front print speed.
40011 Comms - Adjust rear print speed.
40041 Request to start.
40325 Host Command Start Failed.
40326 Host Command Stop Failed.
40327 Host Command Pause Failed.
40328 Host Command Erase Log Failed.
40329 Host Command Erase Batch Failed.
40330 Host Command Erase Session Failed.
40331 Host Command Rename Product Failed.
40332 Host Command Adjust Product Failed.
40333 Host Command Clean 1 Failed.
40334 Host Command Clean 2 Failed.
40335 Host Command Paste Failed.
40336 Host Command PP-Select Failed.
40337 Host Command Change Screen Failed.
40338 Host Command Knead Paste Failed.
40376 Host Command Save Product Failed.