AOI_RS_v85_en - 第31页

Chapter 2 Repair Station Main Progr am AOI Repair Station 27 4.1 SQL Se rver Name  The PC name where SQL s erver is in. This should be the current PC name for a single version and you don’t have to fill the [DBLoginName…

Chapter 2 Repair Station Main Program

AOI Repair Station

 Setting/AOI Repair Station Parameter Setting－Click this to enter the

parameter setting screen.

Chapter 2 Repair Station Main Program

AOI Repair Station

4.1 SQL Server Name

 The PC name where SQL server is in. This should be the current PC

name for a single version and you don’t have to fill the

[DBLoginName] or [Password]. And this should be the Server PC

Name for server version and you have to fill the [DBLoginName] and

[Password] (Default is Sa, Sa).

4.2 Apserver Name

 Apserver Name. It’s usually the same as the SQL server name.

Chapter 2 Repair Station Main Program

AOI Repair Station

4.3 Main Pc Name

 The current Repair PC name.

4.4 Map Location

 The path that all images save in, including PC name and the hard disk

name (Default is D).

4.5 SFC Output Setting

 Turn off the [InsertData.exe] first, and wait till the completion of

following settings to reopen [Insert Data.exe].

Step1. Run [c:\rsinstall\pinstall.exe], and switch to [parameter setting]

page.

Step2. Select the output type of SFC in [SFC Type] field (for example,

[confirm] is component confirming file, [ALL] is component

confirm+original file, [winall] is window confirm+original

file….etc, use the type of setting that user side required).

Step3. Set the path that you want to save the SFC files in at [sfc output

path] field.

Step4. Press [SETTING].

Step5. Press the [ENTER] key will generate a text file under [sfc

output path], while maintaining the data files.

 The data file will be saved under [c:\sfcbk] if the shop flow category is

not being connected

 System doesn’t output the SFC file when you select [None] at [SFC

Type] field.

 When you select [RS232_TA] at [SFC Type] field, it uses the RS232 as

the output surface and you have to select a corresponding Port Number.