00194678_Install_Win2003_unattended - 第6页
Installation Manual for Windows 2003 Server SP2 (unattended setup) Edition 07/2007 US + DE 6 / 40 2 Scope of delivery Windows for SIPLACE software systems Order No: 00376330-01 for Wind ows 2003 Server SP1 or 00386330-01…
Installation Manual for Windows 2003 Server SP2 (unattended setup) Edition 07/2007 US + DE
1 General
1.1 License Agreement
Warning:
Please use this operating system only for SIPLACE machines and for computers with
SIPLACE software systems server operation.
This DVD contains pre-configured software with which to install a pre-set operating system on your
machine if it is a member of the SIPLACE family.
Siemens AG has the sole responsibility for executing this software.
Siemens AG provides support for this product.
1.2 Installation process
This manual describes the unattended Windows 2003 Server SP2 Setup for SIPLACE programming
system computers.
The unattended setup was developed to execute a quick and complete installation of Windows 2003
Server including SP2 for all SIPLACE computers and to meet all requirements. The setup can be
executed on all computer systems described in chapter
Requirements. The unattended setup is a
quick and reliable alternative to the default Microsoft setup. The setup provides the Windows 2003
Server including SP2 operating system only in English (American).
Since the DVD-ROM is bootable, you can start the installation simply by rebooting the system with the
DVD in the DVD-ROM drive. This requires that BIOS is set up to boot from a CD/DVD before the hard
drive.
Warning:
All data on the hard disk will be destroyed during the unattended setup. Therefore you have
to save necessary data before you start the setup.
The unattended setup will lead the user in English. Please refer to the following chapters.
During the installation you have to enter information about the system configuration (see chapter
„Required Parameters“).
5 / 40
Installation Manual for Windows 2003 Server SP2 (unattended setup) Edition 07/2007 US + DE
6 / 40
2 Scope of delivery
Windows for SIPLACE software systems
Order No: 00376330-01 for Windows 2003 Server SP1 or
00386330-01 for Windows 2003 Server SP2
CD/DVD ROM: “Boot CD ROM for Windows 2003 Server SP1 Operating system“ or
“Boot DVD ROM for Windows 2003 Server SP2 Operating system“
Documentation: Installation Manual English/German
3 Requirements
3.1 Hardware
To operate successful with Windows 2003 Server SP2 you have to check the following requirements:
- The computers must have minimum 512 MB RAM.
- Supported Computer Hardware:
- Fujitsu Siemens Computers
- Econel 40
- Econel 50
- Econel 100
Installation Manual for Windows 2003 Server SP2 (unattended setup) Edition 07/2007 US + DE
7 / 40
3.2 Required configuration parameters
For the installation procedure, please note the following information:
No. Information
1 User Name
2 Company Name
3 IP address of the SIPLACE software system (Default: 172.22.100.100)
4 IP address of the default gateways (Optional, if no Remote Support was installedÆ no entry.
Default: no entry).
5 Subnet mask of the local IP network
Table 1: Required configuration parameters
→ Please contact your SIPLACE administrator or your network administrator if the information are
not available.
4 Bugfixing for Windows 2003 Server SP2
The hotfixes for Windows Server 2003 Service Pack 2 have been removed from the installation DVD-ROM.
You have to install the latest delivered Windows Server 2003 SP2 Hotfix-CD as soon as it is available.