00194678_Install_Win2003_unattended - 第7页
Installation Manual for Windows 2003 Server SP2 (unattended setup) Edition 07/2007 US + DE 7 / 40 3.2 Required configuration p arameters For the installation procedure, plea se note the following information: No. Informa…
Installation Manual for Windows 2003 Server SP2 (unattended setup) Edition 07/2007 US + DE
6 / 40
2 Scope of delivery
Windows for SIPLACE software systems
Order No: 00376330-01 for Windows 2003 Server SP1 or
00386330-01 for Windows 2003 Server SP2
CD/DVD ROM: “Boot CD ROM for Windows 2003 Server SP1 Operating system“ or
“Boot DVD ROM for Windows 2003 Server SP2 Operating system“
Documentation: Installation Manual English/German
3 Requirements
3.1 Hardware
To operate successful with Windows 2003 Server SP2 you have to check the following requirements:
- The computers must have minimum 512 MB RAM.
- Supported Computer Hardware:
- Fujitsu Siemens Computers
- Econel 40
- Econel 50
- Econel 100
Installation Manual for Windows 2003 Server SP2 (unattended setup) Edition 07/2007 US + DE
7 / 40
3.2 Required configuration parameters
For the installation procedure, please note the following information:
No. Information
1 User Name
2 Company Name
3 IP address of the SIPLACE software system (Default: 172.22.100.100)
4 IP address of the default gateways (Optional, if no Remote Support was installedÆ no entry.
Default: no entry).
5 Subnet mask of the local IP network
Table 1: Required configuration parameters
→ Please contact your SIPLACE administrator or your network administrator if the information are
not available.
4 Bugfixing for Windows 2003 Server SP2
The hotfixes for Windows Server 2003 Service Pack 2 have been removed from the installation DVD-ROM.
You have to install the latest delivered Windows Server 2003 SP2 Hotfix-CD as soon as it is available.
Installation Manual for Windows 2003 Server SP2 (unattended setup) Edition 07/2007 US + DE
5 Installation
5.1 Installation Steps
5.1.1 Notes
Note:
In the general part of the setup, you have to answer with “Yes“ or “No“. In the second
part you can switch between the wizard dialogs with “Next“ or “Back“ buttons.
With “Cancel“ you can abort the whole installation procedure.
5.1.2 Installation Procedure
→ Insert the BOOT DVD-ROM (Boot DVD ROM for Windows 2003 Server SP2) to start the
unattended setup into the drive.
→ Reboot the computer.
→ Please change the boot devices in your BIOS if the system doesn’t accept the DVD ROM drive as
the boot medium.
8 / 40