00197961-01_UM_JTF-MW_on_SIPLACE_E_en - 第5页

Introduction 1.1.1 Warranty Module Description User Manual JTF-MW on SIPLACE E 5 1 1 I n t r o d u c t io n Introduction This manual provi des technical infor mation and describe s how to operate the SIPLACE JTF-MW JEDEC…

Contents

4 User Manual JTF-MW on SIPLACE E

4 Setting up and Commissioning 27

4.1 Scope of Delivery 27

4.2 Unpacking and Checking the Delivery 27

4.3 Storage 27

4.4 Overview of Configuration 28

4.4.1 Restrictions 28

4.5 Preparatory Work 29

4.5.1 Retrofitting Work on the COT 29

4.5.2 Retrofitting Work on the Host Machine 30

4.6 Installation and Commissioning the SILPACE E 33

4.6.1 Installing the JTF-MW in the Machine 33

4.6.2 Connecting the JTF-MW to the Machine 35

4.7 Configuration of SIPLACE JTF-MW in SIPLACE Pro 35

4.7.1 SIPLACE JTF-MW in SIPLACE Pro – Feeder Tree View 36

4.7.2 JEDEC Tray Description – Tray Tree View 36

4.7.3 Assignment of JEDEC Tray to the Component Shape – Component Shape Tree View 37

4.7.4 Configuration of the Setup – Setup Tree View 38

4.7.4.1 Head Configurations for SIPLACE E 38

4.7.4.2 Table Configuration 38

4.7.4.3 Configuring the SIPLACE JTF-MW on the Table 39

5 Tasks on the Machine 41

5.1 Powering up the Feeder 41

5.2 Controls and Displays on the Feeder Control Panel 41

5.3 Loading and Unloading Trays 43

5.4 Setting the JEDEC Tray Delay 45

5.5 Operating the JEDEC Tray Feeder in the Station Software (SW708) 46

5.5.1 SIPLACE JTF-MW Configured in SIPLACE Pro and Defined at Machine 46

5.5.2 "Display, Check and Set up Feeders, Components and Nozzles" Menu 47

5.5.3 Addressing the SIPLACE JTF-MW at the Location 47

5.5.4 SIPLACE-JTF-MW Settings 48

5.5.4.1 SIPLACE JTF-MW Settings – Functions 49

6 Maintenance 55

7 Service Work 57

7.1 Troubleshooting 57

7.1.1 LED Status on the Control Board 57

7.1.2 General Problems 58

7.1.3 Elevator and Tray Exchange Problems 59

7.1.4 Conveyor and Sensor Problems – Tray Feed Cycle 60

8 Appendix 63

8.1 Labels on the SIPLACE JTF-MW 63

Introduction

1.1.1 Warranty Module Description

User Manual JTF-MW on SIPLACE E 5

1 Introduction

Introduction

This manual provides technical information and describes how to operate the SIPLACE JTF-MW JEDEC

tray feeder in machines of the SIPLACE® E series efficiently and safely.

1.1

1.1 Module Description

Module Description

The SIPLACE JTF-MW is an automatic and fast changer for standard JEDEC waffle pack trays .On

SIPLACE E machines, a JTF-MW tray feeder can be installed on a changeover table. The SIPLACE

JTF-MW occupies a fixed area of tracks on the changeover table.

The SIPLACE JTF-MW stores up to 30 JEDEC waffle pack trays in a cassette and supplies them as re-

quired.

The placement machine can therefore be supplied with different component types at variable changeo-

ver times.

1.1.1

1.1.1 Warranty

Warranty

The user shall report claims immediately within two weeks to the manufacturer.

The user shall provide all evidences and carries all the burden of proof.

In case of a defect ASM has the right to deliver replacement or to rework. ASM has the right to refuse a

demand from user if this high costs are involved.

Usually the warranty term is 12 months on parts starting with delivery. No compensation is granted from

ASM.

1.1.2

1.1.2 Type Plate and Serial Number

Type Plate and Serial Number

The JTF-MW has a type plate on its side which specifies the type, material and serial number.

▪ Type: SIPLACE JTF-MW

▪ Material No./Material-Nr.: 03118894-XX

▪ Serial No.: J0001 to J9999

1.1.3

1.1.3 EU Declaration of Conformity

EU Declaration of Conformity

The product/device described below conforms to the regulations and standards listed in the EU Decla-

ration of Conformity provided.

Manufacturer

ASM Assembly Systems Singapore Pte ltd

2 Corporation Road

#01-03 Corporation Place

Authorized Representative in Europe

ASM Assembly Systems GmbH & Co. KG

Rupert-Mayer-Strasse 44

81379 München

Germany

Model JEDEC tray feeder

Type SIPLACE JTF-MW

Item no.: 03118894-XX

Introduction

Module Description 1.1.4 Correct Usage

6 User Manual JTF-MW on SIPLACE E

1.1.4

1.1.4 Correct Usage

Correct Usage

The product may only be used for the application cases described in the catalogues and technical spec-

ifications i.e. for placement of SMD components and only in connection with the third party devices and

components recommended or approved by SIPLACE.

Any other use is deemed to be incorrect and not as prescribed.

If the product is not used as prescribed, SIPLACE will accept no liability for any damage that may occur

and will not guarantee that the components will work properly and without problems.

Prescribed or correct usage includes the observance of all the instructions in the user manual.

The proper and safe operation of the product requires correct transportation, storage, installation and

assembly, plus careful, accurate utilization and servicing.

1.1.5

1.1.5 Incorrect Usage

Incorrect Usage

Failure to use the product as prescribed can result in both danger to life and limb and material damage.

For this reason, non-prescribed usage is prohibited. If the product is not used as prescribed, ASM As-

sembly Systems GmbH & Co. KG will not accept liability for any damage that may occur and will not

guarantee that the components will work properly and without problems.

Non-prescribed use of the module includes the following examples:

▪ Operation of the module with safety equipment deactivated or removed.

▪ Placement of components that do not meet the permitted specification.

▪ Use of unauthorized accessories and additional modules.

▪ Use of the module by unqualified personnel.

1.1.6

1.1.6 Noise Emissions

Noise Emissions

1.1.7

1.1.7 Environmentally-Friendly Disposal of Materials and Components

Environmentally-Friendly Disposal of Materials and Components

SIPLACE products are manufactured using only materials and parts that can be easily separated and

disposed of in an environmentally-friendly way.

1.1.8

1.1.8 Electromagnetic Compatibility (EMC)

Electromagnetic Compatibility (EMC)

All SIPLACE products are designed and tested for professional use in industrial applications. Electro-

magnetic compatibility in terms of the emission of interference cannot be guaranteed in any other envi-

ronment.

1.1.9

1.1.9 Use of Original SIPLACE Accessories and Spare Parts

Use of Original SIPLACE Accessories and Spare Parts

Only use original spare parts and authorized accessories. The use of other parts will affect safety and

will invalidate the liability for any consequential damage.

Maximum noise level 75 dB (A)

NOTICE

Observe the applicable regulations

The company operating the system has sole responsibility for the proper, environmentally-

friendly disposal of machines, working materials, consumables and wear parts.

► Please observe your national statutory provisions for waste disposal and environmental

protection.