00197961-01_UM_JTF-MW_on_SIPLACE_E_en - 第54页
Tasks on the Machine Operating the JEDEC Tray Feeder in the Station Software (SW708) 54 User Manual JTF-MW on SIPLACE E
Tasks on the Machine
Operating the JEDEC Tray Feeder in the Station Software (SW708)
User Manual JTF-MW on SIPLACE E 53
The Selection button provides the following quick selection types:
1. Selected Trays: xx: Indicates the number of selected trays.
2. Select empty trays: All empty trays in the setup are selected.
3. Select trays deactivated automatically: All automatically deactivated trays are selected.
4. Select trays deactivated by operator: All trays that have been manually deactivated by the operator
are selected.
5. Select trays not used by setup: All trays that are not used in the current setup are selected.
6. Select all: All trays are selected regardless of their state.
7. Deselect all: Each previous selection is discarded.
Tasks on the Machine
Operating the JEDEC Tray Feeder in the Station Software (SW708)
54 User Manual JTF-MW on SIPLACE E
Maintenance
User Manual JTF-MW on SIPLACE E 55
6
6 Maintenance
Maintenance
All bearings used in the machine are sealed, and do not require lubrication. The feeder uses dry-run
chains, and these should not be lubricated.
At the end of every shift:
► Clean the feeder.
► Remove components that might have been dropped on the JTF-MW.