00197469-02_SM_Twin_Kunde_EN - 第9页
1 Introduction 1.5 Tools required, measuring equipment and materials Service Manual SIPLACE TwinStar (Twin, Twin HF, Twin VHF) 07/2020 9 1.5 Tools required, measuring equipment and materials Before starting work, make su…
1 Introduction
1.3 Staff qualifications and training
8 Service Manual SIPLACE TwinStar (Twin, Twin HF, Twin VHF) 07/2020
1.2.7 SIPLACE on the World Wide Web (WWW)
Log in to our SIPLACE® homepage at http://www.asm-smt.com.
You can choose between the German and English version.
The different sections contain information about our products, services and contact persons.
In addition, registered customers can also access the MySIPLACE user group. Here, you can
access special information about our placement systems, e.g.:
●
Technical documentation
●
Technical information
●
Spare parts lists
Registration for the MySIPLACE user group is very simple:
► Click on MyASM and then on Registrieren.
► Fill in the registration form and send it off to us.
Soon afterwards, you will receive your access authorization with user name and password.
1.3 Staff qualifications and training
Qualified or adequately trained personnel means that these people are familiar with the setting up,
operation and maintenance of the machine and the add-on devices and are suitably qualified, e.g.:
●
Have been trained, instructed or authorized to switch on and off, isolate, earth and identify
electrical circuits and system components in accordance with normal safety standards.
●
Have been trained or instructed in the upkeep and use of appropriate safety equipment in
accordance with normal safety standards.
1.4 Abbreviations
Abbreviations Description
PA, PA1, PA2 Placement area, Placement area 1, Placement area 2
CO Component
C&P Collect&Place
CPP Collect&Pick&Place head
CPx Collective term for CPP, CP20, CP12 and/or CP6
PRV Pressure control valve
ESD Electrostatic sensitive device
EMC Electromagnetic compatibility
FS Function state
The last two numbers form an item number.
HF High Force
HMK Head Maintenance Kit
PCB Board
P&P Pick&Place
TH TwinHead
VHF Very High Force
1 Introduction
1.5 Tools required, measuring equipment and materials
Service Manual SIPLACE TwinStar (Twin, Twin HF, Twin VHF) 07/2020 9
1.5 Tools required, measuring equipment and materials
Before starting work, make sure that all the necessary tools and materials are available.
●
As a basic configuration we recommend the "Head Maintenance Kit for CPx" [03109541‑xx]
(see below).
The HMK contains many of the tools and materials needed for service work. Any additional
materials needed will be listed separately.
Please also observe the technical information "Head Maintenance und Exchange
Kit" [DE:TI2017‑09D05] [EN:TI2017‑09E05].
●
We also recommend using the head mount [03056231‑xx].
●
The spare parts required can be found in the chapters concerned.
●
For more information refer to the service section of our homepage at www.siplace.com.
Head Maintenance Kit (HMK)
Fig.2: Overview – Head Maintenance Kit for CPx [03109541‑xx].
NOTICE
Various configuration stages
Your HMK may not contain all the materials shown, depending on its configuration stage.
Tools contained in the HMK: Item no.
T03 Anti-static tweezers, Bernstein 5-192 00377393-xx
T07 Torque screwdriver ESD 1.0-5.0 Nm 03078400-xx
T08 Bit holder for TorqueVario screwdriver 03078706-xx
T09 Extension/ straight TX20 03073256-xx
T12 Hexagon socket head cap screwdriver 0.7 - 2 00320265-xx
T13 Double wrenches size 17 x 19 03109304-xx
T19 Wire cutter electronic size 110 00318673-xx
T22 Multipette M4 00386154-xx
1 Introduction
1.5 Tools required, measuring equipment and materials
10 Service Manual SIPLACE TwinStar (Twin, Twin HF, Twin VHF) 07/2020
Tools contained in the HMK: Item no.
T23 Combitips advanced 0.1ml blue 03070440-xx
T24 Combitips advanced 0.1ml black 03078990-xx
T25 Combitips advanced 0.1 ml yellow 03077923-xx
T26 Combitips advanced 0.1 ml green 03077924-xx
T29 Lubrication application tool for star bearing CPP 03078632-xx
T30 DP clamping ring for fitting the CPP front plate 03077754-xx
T32 Open-end wrench size 10 03109302-xx
T37 Tweezers for filter disk CPP 03046190-xx
T40 Combitips advanced 0.1 ml red 03118173-xx
T41 Silicone hose D=12 mm L=20 mm 03058392-xx
T42 CD marker Edding 8400 03070076-xx
T44 Torque screwdriver ESD 0.1 - 0.6Nm 00386132-xx
T46 Wrench socket size 8 - 1/4" 03122880-xx
T47 Torque screwdriver ESD 0.4 - 1.0 Nm 00386253-xx
T50 Tool to adjust torque screwdriver ---
T53 Tweezers angled 140 mm oval tips 00096487-xx
T57 Combitips advanced 10ml orange 03109540-xx
T66 Filter disk removal device C&P20P 03108641-xx
T76 Torque interchangeable blades 1.5 mm, hexagonal 00386135-xx
T77 Torque interchangeable blades 2 mm, hexagonal 00386136-xx
T78 Torque interchangeable blades 2.5 mm, hexagonal 03090019-xx
T79 Torque interchangeable blades 3 mm, hexagonal 03109522-xx
T80 Phillips interchangeable blades PH1 03075861-xx
In addition, you need the following tools which are not included in the HMK:
Tools not contained in the HMK: Item no.
Size 10 wrench from hexagonal socket wrench set 850‑8mm 03122880‑xx
Pipe/hose cutters Festo ZRS 7658 00381443‑xx
Open-end wrench 5.5mm; 15mm (flat version)
Allen key 0.9 mm 00096201‑xx
Allen key set 1.5 to 10 mm 00353832‑xx
Allen key with pin 3.0 mm
Tweezers 150mm bent
SIPLACE Head Care Station V2.3 assembly 03159555‑xx
Retrofit instructions "digital pressure control valve and new TH air filter" DE+EN:
00196286‑xx
Torque interchangeable blades, Pozidriv size 0 ---
Tools for removing/fitting and calibrating the head, if needed (see also the
service manual for your machine)
---