MPM全自动印刷机中文操作手册 - 第33页
33 About to set SQUEEGEE STROKE. ( 開始設定刮刀行程 ) Pr ess NEXT to Continue, or EXIT to Quit. ( 按 NEXT 繼續 , 按 EXIT 離開 ) Y ou must now jog to the Rear squeegee position. ( 你必須現在移動後刮 刀位置 ) Pr ess NEXT to Continue, or EXIT to qui…
32
or press NEXT to CONTINUE. (按 NEXT 馬上開始在本位置偵測刮刀高度)
Press SELECT or NEXT to Continue. (按 SELECT 或 NEXT 繼續)
你按 SELECT 之後，出現下列訊息及視窗：
JOG ACTIVE…(移動現在刮刀行程位置)
SQUEEGEE STROKE -112.050
Press EXIT to quit. (按 EXIT 離開)
你按 NEXT 與 EXIT 之後，出現下列訊息及視窗並開始測前後刮刀高度：
(開始偵測刮刀高度。測前刮刀時,偵測感應器先下降碰到鋼板後,前刮刀下降,
第一次先壓平刮刀,第二次自動偵測前刮刀高度;測後刮刀時, 偵測感應器先
下降碰到鋼板後,後刮刀下降,第一次先壓平刮刀,第二次自動偵測後刮刀高
度)
(測完刮刀高度後,開始設定刮刀行程)
CAUTION：Auto height sensor in
JOG ACTIVE…
SQUEEGEE STROKE
Press EXIT to quit.
Leveling front blade.
Leveling rear blade.
33
About to set SQUEEGEE STROKE. (開始設定刮刀行程)
Press NEXT to Continue, or EXIT to Quit. (按 NEXT 繼續, 按 EXIT 離開)
You must now jog to the Rear squeegee position. (你必須現在移動後刮
刀位置)
Press NEXT to Continue, or EXIT to quit. (按 NEXT 繼續, 按 EXIT 離開)
(開始移動刮刀行程,完畢按 EXIT 離開)
You must now jog to the(你必須現在移動前刮刀位置)
Rear squeegee position.
Press NEXT to Continus, or EXIT to quit. (按 NEXT 繼續, 按 EXIT 離開)
(開始移動刮刀行程,完畢按 EXIT 離開)
JOG ACTIVE…
SQUEEGEE STROKE -0.050
Press EXIT to quit.
JOG ACTIVE…
SQUEEGEE STROKE -0.050
Press EXIT to quit.
About to set SQUEEGEE STROKE.
Press NEXT to Continue, or EXIT to quit.
You must now jog to the Rear squeegee position.
Press NEXT to Continue, or EXIT to quit.
You must now jog to the front squeegee position.
Press NEXT to Continue, or EXIT to quit.
34
1.6 選擇 Print Parameters 進入印刷參數設定
Hardware Required:
None
Squeegee
刮刀設定參數
Total Force 5.4
刮刀向下壓力[(刮刀長度 X1.2)/2.2]
Down Stop 1.905
刮刀碰到鋼板後再向下壓之距離
Print Speed 25
刮刀印刷行程之速度
Enter squeegee printing parameters. (輸入刮刀印刷參數)
(this affects front AND rear squeegees) (包含前後刮刀)
Press Done when finished. (按 Done 完成)
Board Parameters
基板(PCB)參數設定
Snap off 0.000
PCB 與鋼板之間隙(數字越大,間隙越大)
Tooling Type Unier.
Dedicat.
治具 不使用治具
使用治具
Enter Snapoff into setup menu. (輸入 PCB 與鋼板之間隙印刷參數)
Set to zero for CONTACT printing. (接觸式印刷時，請設為”0”)
Print Parameters