MPM全自动印刷机中文操作手册 - 第45页
45 Pr ess EXIT when you ar e FINISHED. ( 當你已完成 Device Layout 按 EXIT ) 增加一個 2D 檢查點 刪除一個 2D 檢查點 將點選到位置放大與縮小 你按 ADD 之後，出現下列訊息視窗： Please SELECT the type of device to be added . ( 請選擇新增 2D 零件 型式 ) Pr ess EXIT to quit. ( 按 EXI…
44
3. Device Layout
做 2D(錫膏覆蓋率)檢查時,所要檢查零件
About to begin Device Layout TEACH. (即將開始做 2D 檢查的零件之設定)
Press NEXT to Continue, or EXIT to Quit. (按 NEXT 繼續, 按 EXIT 離開)
按 NEXT 之後,出現下列視窗畫面
ADD or DELETE Device(新增或刪除,所指 2D 零件點位置或變更目前位置)
To change the current .
About to begin Device Layout TEACH.
Press NEXT to Continue, or EXIT to Quit.
45
Press EXIT when you are FINISHED. (當你已完成 Device Layout 按 EXIT)
增加一個 2D 檢查點
刪除一個 2D 檢查點
將點選到位置放大與縮小
你按 ADD 之後，出現下列訊息視窗：
Please SELECT the type of device to be added . (請選擇新增 2D 零件型式)
Press EXIT to quit. (按 EXIT 離開)
ADD
DELETE
ZOOM IN
46
選擇 QFP 零件時
Move the trackball pointer to the Area(移動軌跡球,按 SELECT 點選到 PC
Where the device is to be added and 板上 QFP 零件位置)
Press SELECT
按 SELECT 之後,出現下列訊息視窗畫面
JOG to the closest Horizontal end pad. (移動虛線,選擇 QFP 第一點水平
The object should be centered. PAD 點)
Press EXIT when you are FINISHED. (按 EXIT 完成)
Move the trackball pointer to the Area
Where the device is to be added and
Press SELECT
Please DEFINE the END pad of this device.
Press NEXT to alternate between POSITION
Adjust mode and size adjust mode.
Press EXIT when you are FINISHED.