MPM全自动印刷机中文操作手册 - 第55页
55 Press SELECT to continue or EXIT to quit. ( 按 SELE CT 繼續或 EXIT 離開 ) 你按 SELECT 之後，出現下列訊息及視窗： ( 按 SELECT 繼續或 EXIT 離開 ) Jog the crosshair to the desired offset ( 移動十字線到所要位置 ) move position. ( 按 NEXT 調整對比，或 EXIT 完成 ) Pres…
54
BOTH 自動修正完後，更改Vision Offset前後刮刀值
POSITIVE 自動修正完後，更改Vision Offset後刮刀值
NEGATIVE 自動修正完後，更改Vision Offset前刮刀值
About to enter Teach Vision Offsets operation(即將進入Teach Vision
Press NEXT to Continue. Offsets 操作，按 NEXT 繼續)
你按 NEXT 之後，出現下列訊息及視窗：
Place a previously PRINTED board on input(請放印刷完成PC板到軌道)
track
About to enter Teach Vision Offsets operation
Press NEXT to Continue.
Place a previously PRINTED board on input
track
Press SELECT to continue or EXIT to quit.
55
Press SELECT to continue or EXIT to quit. (按SELECT繼續或EXIT離開)
你按 SELECT 之後，出現下列訊息及視窗：
(按SELECT繼續或EXIT離開)
Jog the crosshair to the desired offset(移動十字線到所要位置)
move position. (按NEXT調整對比，或EXIT完成)
Press NEXT for contrast ON, EXIT to finish.
你按 EXIT 之後，出現下列訊息及視窗：
Jog the crosshair to the desired offset
move position.
Press NEXT for contrast ON, EXIT to finish.
Locating the Board….
Please define PASTE Deposit Outline.
Press NEXT to alternate between POSITION
adjust mode and SIZE adjust mode.
Press SELECT when DONE.
56
Please define PASTE Deposit Outline. (請將印完後PC板上錫膏，點取輪廓)
Press NEXT to alternate between POSITION(按NEXT選取錫膏點並調整尺
adjust mode and SIZE adjust mode. 寸、大小)
Press SELECT when DONE. (按SELECT完成)
※選取框為黑色虛線，為選取錫膏點
你按 EXIT 之後，出現下列訊息及視窗：
Please Define Pad Outline. (請將印完後PC板上PAD點，點取輪廓)
Press NEXT to alternate between POSITION(按NEXT選取錫膏點並調整尺
adjust mode and SIZE adjust mode. 寸、大小)
Press SELECT when DONE. (按SELECT完成)
※ 選取框為紅色虛線，為選取PAD點
File
Please Define Pad Outline.
Press NEXT to alternate between POSITION
adjust mode and SIZE adjust mode.
Press SELECT when DONE.