00194329-03 - 第149页
Replacement instructions - Gantry c able and hose carrier SIPLACE HS / S / F 01/2007 Edition 149 : Fix the mount for the X/Y -axis distributor . 2 2 : Gantry 2 + 4 only: Make sure that the ribbon ca bles run correctly be…
Replacement instructions - Gantry cable and hose carrier SIPLACE HS / S / F
01/2007 Edition
148
2
Make sure that the cables follow a gentle arc and are not kinked. 2
2
2
2
: Reattach any piggy-back boards that you removed to the head board and screw them in place
(1 screw).
2
2
: Plug in the remaining cables on the head board.
2
2
2
2
2
2
2
Run cables in an arc
Screw
Replacement instructions - Gantry cable and hose carrier SIPLACE HS / S / F
01/2007 Edition
149
: Fix the mount for the X/Y-axis distributor.
2
2
: Gantry 2 + 4 only:
Make sure that the ribbon cables run correctly beneath the partition plate.
2
Screw
Replacement instructions - Gantry cable and hose carrier SIPLACE HS / S / F
01/2007 Edition
150
: Gantry 2 + 4 only:
Now screw on the partition plate.
2
2
: Gantry 1 and 3:
Insert the hoses through the mount for the X/Y-axis distributor board.
: Cut the hoses connected to the left of the X-axis motor to the right length:
Gantry 1 and 3: 170 mm,
gantry 2 and 4: 245 mm.
2
Measure 245 mm from here
(gantry 2 and 4)
Measure 170 mm from here
(gantry 1 and 3)