00194329-03 - 第196页

Replacement instructions - Gantry c able and hose carrier SIPLACE HS / S / F 01/2007 Edition 196 : Switch on the placement machine. : S tart the SITEST prog ram. : S t art a continuous run of the X or Y axis. : Check aga…

Replacement instructions - Gantry cable and hose carrier SIPLACE HS / S / F

01/2007 Edition

195

: Run the ribbon cables neatly to the gantry conversion board.

Be careful not to damage the cables on sharp edges.

: Fix all ribbon cables and hoses with cable ties at suitable points so that they are unobstructed

at all points and cannot rub against anything.

: Fit the plate with the interface box.

: Move the gantry in the X and Y directions.

Check that the cable and hose carrier is fitted correctly.

: Fit the protective covers onto the placement machines.

: Screw on the stops for the protective covers (2 screws on each).

: Fix and align the Schmersal switches.

: Fit the stopper.

: Fit the uprights and swivel doors.

: Connect the grounding cable to the U-shaped profile and fit it to the placement machine.

: Screw on the design panels once more (loosen just one screw in each arched cross-piece).

Plug in all cables

Cable tray

Replacement instructions - Gantry cable and hose carrier SIPLACE HS / S / F

01/2007 Edition

196

: Switch on the placement machine.

: Start the SITEST program.

: Start a continuous run of the X or Y axis.

: Check again that the components of the cable and hose carrier are laid correctly and are par-

allel.

Make sure that no component of the cable and hose carrier is in contact with other parts

of the machine.

: Correct if necessary.