00193161-01 - 第55页
Manual S-20/S-23 HM/S-25 HM/F4/F5 HM /HS-50 Placement of 0402 components 03/2001 edition 55 5.4 Feeder position recognition 5.4.1 Activati ng feeder posi tion recogni tion PLEA SE NOT E: Feeder pos ition re cognitio n ca…
Placement of 0402 components Manual S-20/S-23 HM/S-25 HM/F4/F5 HM/HS-50
03/2001 edition
54
5.3.5 Positioning the 0402 tape spacer on the 3 x 8 mm S feeder
This feeder has holes at the pick-up position for centering the 0402 tape spacer. The notches in
the center of the tape spacer are aligned with the pick-up position. When the tape spacer is no
longer required, it can be inserted at the feeder park position.
Fig. 5 - 9 Park position for the 0402 tape spacer on the 3 x 8mm S feeder
Manual S-20/S-23 HM/S-25 HM/F4/F5 HM/HS-50 Placement of 0402 components
03/2001 edition
55
5.4 Feeder position recognition
5.4.1 Activating feeder position recognition
PLEASE NOTE:
Feeder position recognition can be activated for 0402 placement when paper tapes are used. The
component pick-up reliability can suffer greatly if it is not activated.
Feeder position recognition can only be activated or deactivated at ‘line engineer’ access level or
higher. 5
– Click on the ‘Machine options’ button in the main view.
– Activate feeder position recognition by putting a check in the check box.
HS-50 user interface - Machine options
Placement of 0402 components Manual S-20/S-23 HM/S-25 HM/F4/F5 HM/HS-50
03/2001 edition
56
Example:
3x8mm S module for 0201 components (plan view)
a 7UDQVSRUWWUDFN
s 7UDQVSRUWWUDFN
d 7UDQVSRUWWUDFN
PCB transport direction
Fiducial for feeder position recognition
0402 Pick-up position for 0402 components
6 Sleeve with ball catch
– Sleeve with ball catch DLM1-12
for the 12-segment Collect&Place head
1 set (12 x)
Article number 00116113-01
Sleeve with ball catch
T
M