192277 - Micron Technical Reference Volume 3 - 第130页

CYCLONE UNDER STENCIL CLEANER MODULE CALIBRATIONS 26.20 Technical Reference Manual Chapter Issue 11, Feb 18

CYCLONE UNDER STENCIL CLEANER MODULE

CALIBRATIONS

Chapter Issue 11, Feb 18 Technical Reference Manual 26.19

7. Replace the empty 5 litre container with a 5 litre container full of the solvent

to be used.

8. Select Set Solv Full and confirm by selecting Yes.

9. Select Exit.

10. Select Exit.

11. Select Back.

Fabric If fabric counting is enabled, the software needs to know the fabric roll length

when first fitted to the under stencil cleaner.

NOTE

The length of the fabric roll is printed on the fabric roll wrapping.

To calibrate the software carry out the following procedure:

1. Select Open Cover Commands.

NOTE

If the stencil image is centre justified, the stencil may need to be removed

to gain access to the Cyclone under screen cleaner.

2. Open the front printhead cover.

3. Change the fabric cassette as detailed in the consumable replenishment.

4. Select Change Paper.

5. Ensure the fabric length parameter matches that stated on the fabric roll

wrapper.

6. Select Continue.

7. Select Prime Paper.

8. When prompted, press the two control buttons simultaneously ensuring that

the fabric feeds correctly and any slack is taken up.

9. Close the front printhead cover.

10. Press the System button.

11. Select Back.

12. Select Back.

CYCLONE UNDER STENCIL CLEANER MODULE

CALIBRATIONS

26.20 Technical Reference Manual Chapter Issue 11, Feb 18

RISING TABLE MODULE - STYLE 1

OVERVIEW

Chapter Issue 9, Aug 14 Technical Reference Manual 27.1

CHAPTER 27 RISING TABLE MODULE - STYLE 1

OVERVIEW

NOTE

For details on the Remote Board Stop and sensors refer to the Board Stop

Chapter.

Item Description Item Description

1 Rail to Table Height Adjuster (in 4 positions) 5 Rising Table Motor with Integral Electromagnetic Brake

2 Rising Table Leadscrew 6 Rising Table Drive Belt

3 Home Vane 7 Linear Bearing Guide (in 2 positions)

4 Home Sensor 8 Manual Tooling Plate

View on Rear Right of Rising Table

NOTE

The rising table home position is

lower with Modular Transport Rail

system therefore, the home vane

has a smaller vane.