192277 - Micron Technical Reference Volume 3 - 第152页
RISING TABLE MODULE - STYLE 2 TEST CYCLES 28.10 Techncial Reference Manual Chapter Issue 3, Feb 18
RISING TABLE MODULE - STYLE 2
TEST CYCLES
Chapter Issue 3, Feb 18 Technical Reference Manual 28.9
TEST CYCLES For information on the Test Cycle function refer to the Screen Alignment Module
chapter of this manual.
RISING TABLE MODULE - STYLE 2
TEST CYCLES
28.10 Techncial Reference Manual Chapter Issue 3, Feb 18
BOARD SUPPORT TOOLING MODULE
INTRODUCTION
Chapter Issue 7, Jan 15 Technical Reference Manual 29.1
CHAPTER 29 BOARD SUPPORT TOOLING MODULE
INTRODUCTION The board support tooling module includes the following:
• Manual Tooling Plate
• Tooling Options
Manual Tooling
Plate
The manual tooling plate is the basic tooling module fitted to the machine rising
table. There are various tooling options which attach to the manual tooling plate
either by dowel pins or magnetically.
Figure 29-1 Manual Tooling Plate
Tooling Options NOTE
Do not leave unused tooling on the rising table in the area behind the rear rail.
If any object is left on the rising table outside the board printing area, it could
collide with the camera carriage as the rising table moves to print height.
The following table shows how the tooling options are fitted to the tooling plate:
Tooling Fixing
Magnetic Support Pillars Magnetic
Vacuum Box Tooling Dowel Pins
Dedicated Tooling Plate Dowel Pins and Magnetic
ProFlow Stencil Support Magnetic
Grid-Lok Tooling Magnetic