192277 - Micron Technical Reference Volume 3 - 第257页
MAN MACHINE INTERFACE PROGRAMMABLE BEACON Chapter Issue 11, Jan 17 Technical Reference Manual 34.13 Edit Beacon Attributes The three lights and the buzzer can be programmed. In each case, they can be in a steady state, p…
MAN MACHINE INTERFACE
PROGRAMMABLE BEACON
34.12 Technical Reference Manual Chapter Issue 11, Jan 17
The new category pane opens.
Type in the new category name; the create category button remains greyed out
until a unique category name is assigned. On completion select Create Cate-
gory.
All new categories are automatically assigned a default status where all indica-
tors are in the OFF state.
MAN MACHINE INTERFACE
PROGRAMMABLE BEACON
Chapter Issue 11, Jan 17 Technical Reference Manual 34.13
Edit Beacon
Attributes
The three lights and the buzzer can be programmed. In each case, they can be
in a steady state, pulsing (shown radiated) or OFF (shown with a red cross).
Select the category from the table followed by the lights or buzzer on the beacon
representation (Calibration is shown selected above). When the indicators are
selected on the beacon representation they can be switched ON, OFF or
Pulsing. In the Open Cover category (table row 6) this has been set up as
follows: Red Indicator pulsing; Yellow indicator ON steady; Green indicator
OFF; Buzzer ON steady.
Select Assign Conditions.
The user can assign conditions to a category; custom categories can be created
MAN MACHINE INTERFACE
PROGRAMMABLE BEACON
34.14 Technical Reference Manual Chapter Issue 11, Jan 17
where the beacon representation is the same for each category.
Select Edit.
Select the (categories) for the conditions to apply.
On the previous page the category has been chosen - Operator Adjust; in the
example above, the ProFlow Kneading or ProFlow Paste Load beacon condi-
tion has been applied to it.
Restore Category
Defaults
Selecting the restore category defaults button on the Beacon page opens the